IEPE Monitran MTN/1010 industrial accelerometer

Budget-friendly price Request a quote
100 mV/g ±10% (IEPE) | 2Hz to 10kHz ±5% | ±80g | -25 to 120°C | Integrated TNC connector | Stainless steel, IP65

The Monitran MTN/1010 is a general-purpose, top-input, constant-current (IEPE) industrial accelerometer with isolated AC output and standard sensitivity of 100 mV/g ±10% at 80 Hz. It uses coaxial cable with an integrated TNC connector.

Manufactured entirely from stainless steel with IP65 sealing for prolonged vibration analysis in harsh environments, featuring a 25 mm hexagonal base and mounting via ¼"-28 UNF female thread or quick-release fasteners. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Standard sensitivity of 100 mV/g ±10% at 80 Hz (optional: 10, 30 and 50 mV/g)
  • Frequency response of 2 Hz to 10 kHz ±5% (-3 dB at 0.8 Hz) and dynamic range of ±80 g
  • Stainless steel housing, IP65, integrated TNC connector and range of -25 to 120 °C

Technical Frequently Asked Questions

What sensitivities are available on the Monitran MTN/1010?

The standard sensitivity is 100 mV/g ±10% nominal at 80 Hz. Optional sensitivities of 10 mV/g, 30 mV/g and 50 mV/g (±10%) are available via the code «xx».

How does the MTN/1010 differ from the MTN/1100 with respect to cable and interference?

The MTN/1010 uses coaxial cable with a TNC connector and non-insulated base, while the MTN/1100 uses two-wire shielded cable, internal shielding, and isolated electronics; therefore, the MTN/1010 offers less immunity to electrical interference.

What constant current power supply does the MTN/1010 require?

It operates with a current range of 0.5 mA to 8 mA (constant current circuit with +18 to 30 V DC power supply in the system connection scheme) and has a nominal bias voltage of 12 V DC.

Properties

FeatureSpecification
Measure and signal
Measured magnitudeAcceleration (vibration)
ExitIsolated AC, constant current (IEPE)
Standard sensitivity100 mV/g ±10% nominal at 80 Hz
Optional sensitivities10, 30 or 50 mV/g (±10%)
Frequency response2 Hz to 10 kHz ±5% (-3 dB at 0.8 Hz)
Mounted base resonance16 kHz (nominal)
Dynamic range±80 g
Cross-sectional sensitivityLess than 5%
Electrical noise0.1 mg max.
Food and environment
Current range0.5 mA to 8 mA
Polarization voltage12 V DC (nominal)
IsolationNon-insulated base
Temperature range-25 to 120 °C
SealedIP65
Mechanics and connection
Housing materialStainless steel
EntranceSuperior
ConnectorIntegrated TNC
Mounting¼"-28 UNF female thread or female quick-release fastener
Tightening torque8 Nm
Dimensions48 mm high, Ø22 mm, 25 mm hexagon between faces
Weight110 g (nominal)
ReferenceConfiguration
MTN/1010-xx MTN1010XXVariant: MTN/1010 · Connection: Integrated TNC connector · Mounting: ¼"-28 UNF female · xx = optional sensitivity 10, 30 or 50 mV/g (±10%) Technical data sheet MTN/1010 (PDF)
MTN/1010Q-xx MTN1010QXXVariant: MTN/1010 · Connection: Integrated TNC connector · Mounting: Female quick-release · xx = optional sensitivity 10, 30 or 50 mV/g (±10%) Technical data sheet MTN/1010 (PDF)
IEPE Monitran MTN/1010 industrial accelerometer with integrated TNC connector
Dimensions of the Monitran MTN/1010 accelerometer: 48 mm high, Ø22 mm, 25 mm hexagon between faces

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Contactless: magnet in hollow shaft | Hollow shaft Ø4, 5, 6, 8 or 10 mm | Housing 45×45 mm | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP67 shaft, 30000 rpm
DPF Sensors logo
Field transmitters for measuring the concentration of various types of gases. With alarm, light signal, and use in ATEX zones. For indoor and outdoor use.
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
PH sensor for range 0 to 13pH with 9m cable Compatible with all controllers on the market
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
pH sensor for range 0 to 13pH with S7 connector Compatible with all controllers on the market
Disibeint Electronic, manufacturer of level sensors and control relays
Level float for automatic filling and emptying control
ATESTEO LOGO, manufacturer of torque sensors
Inductive PCM Transmission | 60,000 N·m | 8,000 RPM | PCD Flange 369.0 mm | Inertia 1.6378 kg·m²
NESA Environmental Meters
Dry and wet bulb temperature | Humidity 0 ÷ 100% RH | SigFox, LoRa/NESA, GSM/GPRS | Lithium battery, rechargeable or 5W panel | -40 ÷ +60°C | IP65 | ~455 x 300 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø63 housing, hollow shaft H7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Elastic coupling | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen (prototype) | Ø 48 mm | Up to 16 bits per revolution | Plug-in hollow shaft | 8 … 32 VDC | Open system | Measuring range: 44 revolutions (15840°)
NESA Environmental Meters
4-wire Pt100 | -40 ÷ +60 °C | Pt100 1/3 DIN (±0.1 °C @ 0 °C) | Sphere approx. 150 mm | Resolution 0.01 °C | WMO Annex.8
Shopping Basket