IKPM
Displacement sensor range from 10 to 100 mm, with and without spring feeler, IP67
- Manufacturer: DPF Sensors
- Category: Displacement, SENSORS, Potentiometric linear sensors
Displacement sensor range from 10 to 100 mm, with and without spring feeler, IP67
Potentiometer from 2 Kohm to 5 Kohm depending on the range, linearity 0.5%, repeatability 0.01 mm, clamp mounting, widely used in rod extensometers.
Properties
Other products
RS232 – RS485 – RS232 Isolator-Repeater Converter
LVDT with Electronics | Stroke 5 mm to 15 mm | Output 4-20mA / ±10V | Threaded Housing M30 x 1.5 | Pressure Option 60 Bar | IP66/IP68 Protection
Hollow shaft Ø16 H7 | B10 flange Ø115 mm | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | 100 kHz (300 kHz optional)
Absoluto, hilo Ø 0,51 mm | Carrera hasta 6 m | Resolución 0,1 o 1 mm | SSI, Gray o binario; preset S1/S4 | 10–30 V CC | IP64 (conectores IP65) | Linealidad ±0,05 % f.s.
Salida incremental | Brida cuadrada □45 mm | 100 imp/vuelta con enclavamiento | 1–2500 imp/vuelta (opción F) | NPN, PNP, push-pull, driver | 5 V u 8–28 V según versión | IP64 lado eje (cable IP65)
2-channel encoder isolator-amplifier-duplicator-adapter. Up to 1 MHz (adapts simplex signals to differential signals).
Combined glass/gel reference pH electrode, epoxy body. 9m cable. Low cost.
Hollow shaft Ø6–12 mm | Internal coupling | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with option Z) | ATEX Ex d IIC T6
Hollow shaft Ø10 H7 | Internal star coupling | Up to 65536 steps (16 bits) | SSI | 10–30 V | IP65 shaft (IP66 sealed) | Gray or binary