Incremental Encoder Kit and Low Cost I/59CE
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder Kit Low Cost, SENSORS
The I/59CE Low-Cost Incremental Encoder Kit addresses the need for precise incremental signals in motors with special tangential couplings. Its compact design allows for direct integration into hollow shafts without mechanical interference, ensuring stable operation under industrial vibration conditions.
The technical solution offers a bearing life of 1.5 x 10^9 revolutions and supports radial loads of up to 6 kg. With a maximum frequency of 100 kHz and a starting torque exceeding 60 gcm, it ensures data capture in high-speed and variable-torque environments.
Constructed with an aluminum base and Valox 420 cover, it withstands temperatures from 0 to 60 °C and impact resistance of 50 G. This Incremental Encoder Kit and Low Cost I/59CE is available in guemisa.es.
- Aluminum base and Valox 420 lid for industrial durability.
- Hollow stainless steel shaft compatible with motors and tangential couplings.
- Guaranteed service life of 1.5 x 10^9 revolutions ball bearings.
- Impact resistance of 50 G and vibration resistance of 12 G across a wide frequency range.
Technical Frequently Asked Questions
How does the I/59CE model differ from the I/E6 in terms of coupling?
The I/59CE incorporates a special tangential coupling designed specifically for use in engines, while other series may use standard couplings. This configuration allows for axial articulation compensation of ±0.2 mm and radial compensation of ±0.05 mm, optimizing the direct mechanical connection.
What alignment precautions are required for the I/59CE hollow shaft?
To ensure accuracy, the mounting must respect the maximum offset tolerances: axial ±0.2 mm, radial ±0.05 mm, and angular ±1°. The hollow stainless steel shaft allows for secure installation without compromising the bearing's integrity or its calculated service life.
What connectors and output options are available for the I/59CE?
The model supports multiple electronic configurations, including push-pull, standard NPN, or PNP outputs. Connection options include cable end connectors (VM, TM, VL) or terminal boxes, allowing the output to be tailored to the specific requirements of the control system.
Properties
| Feature | Specification |
|---|---|
| Power Supply | 5÷30V DC |
| Base Material | Aluminum |
| Cover Material | Valox 420 |
| Total Weight | 290 grams |
| Hollow Shaft Diameter | Ø6÷15 mm Stainless Steel |
| Maximum Radial/Axial Load | 6 kg |
| Maximum Continuous RPM | 6000 revolutions/minute |
| Bearing Life | 1.5 x 10^9 revolutions |
| Maximum Frequency | 100 kHz (Option 300) |
| Operating Temperature | 0 ÷ 60 °C |
| Impact Resistance | 50 G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Maximum consumption mA | Standard 120 mA |
| LED Light Source Life | = 100,000 hours |
| IP Protection Output Side | IP65 (Standard) |
Other products
