Incremental Encoder for Motors I/59CA
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS
The I/59CA Incremental Motor Encoder addresses the need for precise measurement in environments with mechanical vibrations and high axial loads, typical of industrial motor applications. Its robust design allows it to operate where other sensors fail due to structural fatigue or constant misalignment.
The technical solution incorporates a special internal tangential coupling and ball bearings with a lifespan of 1.5 x 10^9 revolutions. It supports up to 8000 continuous RPM and a maximum radial/axial load of 6 kg, guaranteeing stable data transmission at frequencies up to 100 kHz.
The construction combines an aluminum body with a VALOX 420 cover for thermal resistance between -30 and 85 °C. Standard IP65 protection ensures operation in dust and water, available in guemisa.es.
- Aluminum body with VALOX 420 lid for structural durability.
- Hollow stainless steel shaft compatible with diameters from 6 to 15 mm.
- Configurable Push-Pull, Line Driver or Sinusoidal output depending on order code.
- Impact resistance of 50 G and vibration resistance of 12 G in the range of 10 ÷ 2000 Hz.
Technical Frequently Asked Questions
How does the I/59CA differ from the I/58M model?
The I/59CA features a collar and hollow shaft, while the I/58M is a standard encoder. The I/59CA supports axial loads up to 6 kg and has a bearing life of 1.5 x 10^9 revolutions, exceeding that of the base series.
What alignment precautions are required for the I/59CA shaft?
The special internal tangential coupling allows for angular compensation of ±1°, radial compensation of ±0.05 mm, and axial compensation of ±0.2 mm. Ensure that the load does not exceed 6 kg to avoid damage to the sealed or standard bearings.
What connectors and output options are available for the I/59CA?
Terminal boxes (CH, CH5, CH6) or cable end connectors (VM, TM, VL, TL) are available. Outputs include standard PNP, NPN open collector, Push-Pull PRO, and 26LS31/88C30 line driver, depending on the selected code.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental with Hollow Shaft |
| Main Application | Engine Series |
| Feeding | 5÷30V (See configuration) |
| Axis | Hollow Stainless Steel Ø6-15mm |
| Weight | 290 grams |
| Maximum Radial/Axial Load | 6 kg |
| Maximum Continuous RPM | 8000 RPM (+30% intermittent) |
| Starting Torque | > 60 g·cm |
| Bearing Life | 1.5 x 10^9 revolutions |
| Impact Resistance | 50 G x 11 ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Operating Temperature | 0 ÷ 70 °C |
| Number of Impulses/Revolution | 1 ÷ 25000 PPR |
| Maximum Frequency | 100 kHz (Option 300) |
| IP protection | IP65 Standard / IP66 Sealed |
| Tolerance Phases | ± 15° symmetry |
Other products
