DUPLO Par and DUPLO Par DUO
Insulated thermocouple duplicator J, K, T, E, N, R, S, B – To connect 2 systems to a single thermocouple
- Manufacturer: DPF Sensors
- Category: Signal converters, Duplicators, Signal duplicators, INSTRUMENTATION, Temperature, Thermocouple
Isolated thermocouple duplicator J, K, T, E, N, R, S, B To be able to connect 2 systems to a single thermocouple Thermocouple input, 2 x thermocouple output Power supply 24 Vdc DUPLO Pair DUO, two duplicators in the same box
Properties
Other products
Signal Conditioner | IEPE Input | 4-20mA Output (Speed/Acceleration) | Configurable Low-Pass Filter | DIN Rail Mounting | 24V DC Power Supply | Galvanic Isolation | Range Adjustment via Switch | Polycarbonate Housing | IP20 Protection
Solid State Relay (AC) 32A with Radiator Rail
Manual Channel Selection | Capacity up to 64 Sensors | BNC Output for Analysis | IP65 Junction Box | No Power Supply Required | Rotary Switch | Internal Terminal Inputs | Stainless Steel or GRP | Ideal for Inspection Routes | Signal Centralization
Power Supply -24VDC (18-32V) | Voltage Output -2V to -18V | Current Output 4-20mA | DIN Rail Mounting | Frequency DC-10kHz | Linearity <1% | Temperature -20°C to 80°C | BNC Input/Terminals | Eddy Current Probes | AISI 4140 Calibration
RTD Replicator for PT100 and PT1000 | 2, 3 and 4 wires | DIN rail | 10-30 V AC/DC
Miniature size wire displacement sensor, ranges from 100 to 350 mm
Battery Powered | Analog Output (Amps) | Up to 4 Channels | 10 Hours of Autonomy | BNC or Cable Gland Connectors | Low Battery LED Indicator | ABS Carrying Case | Compatible with IEPE Accelerometers | Rugged Field Design | Low Noise Electronics
Universal multiplexer of 4 x 2-wire RTDs (NTC 10K, PTC 1K, Pt1000, Pt100, ..) to the output of the same probe