Low Cost Incremental Encoder I/63TE
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Low Cost Incremental Encoder, SENSORS
The ELCIS I/63TE model is a Low Cost series incremental encoder with square flange and protection against external agents.
63.5 mm square flange with aluminum base and Valox 420 cap (500 g), Ø10 h7 stainless steel shaft, Ø50 h7 front centering and Ø5.5 mm holes on a 52.4 mm square.
Resolution from 1 to 1024 pulses per revolution, with a maximum frequency of 60 kHz (100 kHz optional) and high MTTFd according to UNI EN ISO 13849-1. NPN, PNP, push-pull output stages, 26LS31 driver or 88C30 driver. Available in guemisa.es.
- 63.5 mm square flange: front centering of Ø50 h7 and Ø5.5 mm drills on a 52.4 mm square.
- Stainless steel shaft Ø10 h7: maximum axial/radial load of 8 kg.
- Construction: aluminum base and Valox 420 lid; weight 500 g.
- Resolution and frequency: 1 to 1024 imp/revolution; max. frequency 60 kHz (100 kHz optional).
- IP protection: IP65 on the shaft side (IP66 with sealed bearings, option Z); the outlet side depends on the connection, from IP00 to IP67.
Technical Frequently Asked Questions
What are the mechanical dimensions of the I/63TE encoder?
It has a 63.5 mm square flange with Ø50 h7 front centering and Ø5.5 mm holes on a 52.4 mm square.
What load can its axle support?
It supports a maximum axial/radial load of 8 kg on its Ø10 h7 stainless steel shaft.
What IP protection ratings does it offer?
On the shaft side, IP65 standard and IP66 with sealed bearings (option Z). On the output side, IP00 on the terminal box, IP65 on the cable and CM and CL connectors, and IP67 on the CH, CH5 and CH6 connectors.
Properties
| Feature | Specification |
|---|---|
| Mechanics | |
| Housing | 63.5 mm square flange (aluminum base, Valox 420 lid) (customizable upon request) |
| Weight | 500 g |
| Axis | Ø10 h7 stainless steel (customizable upon request) |
| max. axial/radial load. | 8 kg |
| Bearing life | 1.5 × 10⁹ revolutions |
| Electric | |
| Exit-side protection | According to connection: IP00 (terminal box), IP65 (CV, CM, CL), IP67 (CH, CH5, CH6) |
| Feeding | 5÷30 V |
| Max. consumption. | 120 mA (standard) / 180 mA (line driver) (customizable upon request) |
| Impulses per lap | 1 to 1024 |
| Max frequency. | 60 kHz (100 option) |
| Protection and environment | |
| axle-side protection | IP65 standard (IP66 with sealed bearings, option Z) |
| max. continuous RPM | 6000 rpm (standard) / 3000 rpm (Z) |
| Impact resistance | 50 G × 11 ms |
| Vibration resistance | 12 G (10 ÷ 2000 Hz) |
| Operating temperature | 0 … +70 °C (customizable upon request) |
Other products
