Incremental Encoder with Tachometric Dynamo I/98T
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder with Tachometric Dynamo, SENSORS
Encoder with internal self-compensating coupling, the same as model 98, but with a built-in dynamo upon customer request.
The I/98T model offers 1 to 2540 pulses per revolution with frequencies up to 100 kHz (300 kHz optional). Output electronics: NPN, open collector NPN, PNP, open collector PNP, push-pull, push-pull PRO, 26LS31 driver, TTL 7404, and 88C30 driver. Available in unidirectional (M), bidirectional (B), and zero-point (BZ, MZ) versions.
Ø98 mm housing with anodized aluminum base and cover, and Ø16 H7 hollow stainless steel shaft. Up to 6000 rpm continuous with IP64 on the shaft side, or 3000 rpm with the Z option (sealed bearings, IP66). LED light source with a lifespan of over 100,000 hours. Radial connection via CV cable (1 m, IP65), terminal box (IP00), or cable end connectors. Available in guemisa.es.
- Built-in tachymeter dynamo made to order from the client.
- Hollow shaft Ø16 H7 made of stainless steel and housing Ø98 mm.
- Self-compensating internal coupling: ±0.15 mm axial, ±0.05 mm radial and ±1° angular.
- Until 6000 rpm continuous; IP66 on the axis side with the Z option (sealed bearings).
- 1 to 2540 pulses per revolution with NPN, PNP, push-pull, driver and TTL electronics.
Technical Frequently Asked Questions
How is the tachymeter dynamo obtained in the I/98T?
The I/98T is the same as the 98 model, with internal self-compensating coupling, but with the dynamo incorporated upon customer request.
What electronic outputs and power supplies does the I/98T encoder offer?
NPN, NPN open collector, PNP, PNP open collector, push-pull, push-pull PRO, 26LS31 driver, TTL 7404 and 88C30 driver (max. 15 VDC), with M, B, BZ and MZ versions. 5÷30 V power supply; max. consumption 120 mA standard and 180 mA with line driver.
What connections and IP rating does the I/98T encoder support?
CV cable (1 m, IP65), terminal box (IP00) and cable end connectors (encoder output IP65). On the shaft side, the protection is IP64 as standard or IP66 with the Z option (sealed bearings).
Properties
| Feature | Specification |
|---|---|
| Mechanics | |
| Housing | Ø98 mm |
| Weight | 600 g |
| Axis | Hollow shaft Ø16 H7 stainless steel |
| max radial/axial load. | 8 kg |
| Electric | |
| Exit-side protection | According to connection (IP65 with CV cable, IP00 with terminal box) |
| Impulses per lap | 1 to 2540 |
| Max frequency. | 100 kHz (300 kHz optional) |
| Feeding | 5 ÷ 30 V |
| Max. consumption. | 120 mA standard · 180 mA line driver |
| Protection and environment | |
| axle-side protection | IP64 standard (IP66 sealed with option Z) |
| max. continuous RPM | 6000 rpm (standard) · 3000 rpm (option Z) |
| Impact resistance | 50 G × 11 ms |
| Vibration resistance | 12 G (10 ÷ 2000 Hz) |
| Operating temperature | 0 … +70 °C |
| Other features | |
| Tachymetric dynamo | Added at the customer's request |
Other products
