Miniature multi-turn magnetic encoder MZ1-2200 CANopen

Budget-friendly price Request a quote
CANopen | Ø 22 mm | 16 bits per revolution | Shaft Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP50 / IP65 | Measuring range: 44 revolutions (15840°)

Novotechnik MZ1-2200 CANopen magnetic multi-turn encoder. Non-contact magnetic multi-turn sensor, only Ø22 mm.

True-Power-On magnetic multi-turn absolute rotary encoder (GMR magnetoresistive technology), contactless, Ø22 mm. Measuring range 44 turns (15840°), resolution up to 16 bits per turn. Detects turns without power or backup battery. IP50 / IP65 protection depending on the mechanical version.

Key points

  • Contactless, magnetic
  • Ø22 mm housing
  • True-Power-On System: Counts laps even without power; patented non-volatile technology, no gears or batteries
  • IP50 and IP65 protection
  • Meets European E1 requirements

Technical Frequently Asked Questions

What can be connected to the MZ1-2200 CANopen multi-turn magnetic encoder?

It can be connected to Novotechnik M12 connectors and cables and Novotechnik rotary sensor couplings and accessories.

How do I order the MZ1-2200 CANopen multi-turn magnetic encoder?

The order code has six fields: mechanical version, parameterization, interface, parameters, speed, and connection. For example, MZ1-2211-A7F-611-232 is the version with an M10 x 0.75 threaded bushing, 6 mm shaft, IP65 rating, Pre-Operational mode, node ID 127, one position and one speed, 1000 kBaud, and a 1 m shielded 4-pole cable. All the options for each field are available in the order code configurator on this page.

Under what conditions does the MZ1-2200 CANopen multi-turn magnetic encoder operate?

Operating temperature: -40 … +85 °C; -25 … +85 °C (M12 connector). Protection: IP50 / IP65 and IP67 (housing side) depending on the mechanical version.

Properties

FeatureSpecification
Extent
Measured variablesPosition, speed, temperature, and supply voltage
Measuring rangeMeasuring range: 44 turns (15840°)
Speed measurement range0 … 546 rpm
Resolution (in 360°)16 bits
Speed resolution0.1°/s
Linearity≤ ±1°
Repeatability≤ ±0.1°
Hysteresis≤ ±0.5°
Temperature error±0.36°
Interface and protocol
ProtocolCANopen according to CiA DS-301 V4.2.0, device profile DS-406 V4.1.0, Encoder Class C3, LSS services according to CiA DS-305 V3.0.0
Node ID1 … 127 (default 127)
Transmission speed50 … 1000 kBaud
Update frequency1 kHz
Signal propagation delay< 0.3 ms
Functions and supervision
Programmable parameterse.g. cams, working area, preset, direction of rotation, node ID, transmission speed, resolution
State oversight functionsStatistical data on temperature, operating time, supply voltage, and operating performance
Start-up time≤ 70 ms
DiagnosisActivated (in case of error, the position signal falls outside the plausible signal range)
Feeding and protection
Supply voltage Ub12/24 VDC (8 … 32 VDC)
No-load current consumption≤ 60 mA
Overvoltage protection45 VDC (permanent)
Reverse polarity protectionYes (power lines and outlets)
Short circuit protectionYes (all outputs connected to GND and the supply voltage)
Insulation resistance (500 VDC)≥ 10 MΩ
Internal bus terminationWithout (120 Ω internal load resistance available upon request)
Environmental conditions
Working temperature-40 … +85 °C; -25 … +85 °C (M12 connector)
Vibration IEC 60068-2-620 g, 5 … 2000 Hz, Amax = 0.75 mm
IEC 60068-2-27 Shock50 g, 6 ms
DIN EN 60529 protectionIP50 / IP65 and IP67 (housing side) depending on the mechanical version
Insensitivity to DC magnetic fields< 15 mT
Lifetypical > 10 million movements
MTTF (IEC 60050)440 years
Electromagnetic compatibility
ISO 13766-1Construction machinery
ISO 14982Agricultural and forestry machinery
European requirements E1Meets E1 requirements
EN 61000-4-2 ESD (contact/air discharge)4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields (RFI)30 V/m
EN 61000-4-4 Fast transients (burst)1 kV
EN 61000-4-6 Conducted disturbances (HF fields)10 V ef.
EN 55016-2-3 Radiated disturbancesIndustrial and residential area
Materials and mechanical data
HousingTemperature-resistant PPS plastic
BushingCuZn21Si3P
AxisStainless steel X8CrNiS18-9 (No. 1.4305)
BearingSliding bearing
FixationM10 x 0.75 center mounting with lock nut (included in the supply)
Electrical connection2x 2x 0.34 mm² (AWG 22) TPE shielded cable / M12x1 connector, A coding, with cable length L = 0.15 m
Mechanical tourContinuous
Allowable load on the shaft, static or dynamic1 N (axial / radial)
Starting torquetypical ≤ 3 Ncm
Maximum working speed500 rpm
Weight (without connection)approx. 30 g
OptionMeaning
Example: MZ1-2211-A7F-611-232 = M10 x 0.75 threaded bushing with 6 mm shaft IP65, Pre-Operational mode, node ID 127, 1 position and 1 speed, 1000 kBaud and 1 m shielded 4-pole cable.
1 · Mechanical version
2201M10 x 0.75 threaded bushing, 6 mm shaft, IP50
2211M10 x 0.75 threaded bushing, 6 mm shaft, IP65
2221M10 x 0.75 threaded bushing, 6 mm shaft, IP50, with index pin
2231M10 x 0.75 threaded bushing, 6 mm shaft, IP65, with index pin
2 · Parameterization
A7FPre-Operational mode startup, Event-Timer 0 ms, Node ID 127
3 · Interface
6CANopen
4 · Interface parameters
11x position, 1x speed
5 · Transmission speed
11000 kBaud
2800 kBaud
3500 kBaud
4250 kBaud
5125 kBaud
750 kBaud
6. Electrical connection
2324-pole cable, shielded, L = 1 m
5115-pin M12x1 connector with shielded cable, L = 0.15 m
The code is formed using one option from each field, in the order shown in the example. Contact us and we will confirm the exact reference.
Novotechnik MZ1-2200 Miniature Multi-Turn Magnetic Encoder CANopen
Dimensional drawing Miniature multiturn magnetic encoder MZ1-2200 CANopen Novotechnik

Other products

DPF Sensors logo
Analog-digital CO2, humidity and temperature controller sensor with LED signaling, relay alarm, for indoor use.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Section 18×54 mm | Stroke 70–2440 mm | Resolution 5, 1 and 0.5 µm (x4) | Line driver output (VD) | Power supply 5 V ±5 % | IP53 (IP64 with compressed air) | Accuracy ±10 µm (opt. ±5 µm)
NESA Environmental Meters
Frecuencia, 0÷2Vdc, 4÷20mA, RS485 | 0,28 ÷ 50 m/s | Primera clase (First Class) IEC 61400-12-1 | R 125 mm · 300 mm | 10 ÷ 28Vdc | Conector IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø41.5 mm, shaft Ø6.35 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
DPF Sensors logo
TSC serial inclinometer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø27 mm | Shaft Ø3.17 h7, centered Ø25.4 h7 | 50–800 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø16 H7 | B10 flange Ø115 mm | Housing Ø96 mm | 1 to 3600 rpm | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 with Z option)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo-type mounting | Shaft Ø10 h7 | 1 to 10000 impedances/revolution | NPN, PNP, push-pull, line driver | 5–30 V | IP65 shaft (IP66 sealed) | ATEX II 2 GD, Ex d IIC T6/T5
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CAN SAE J1939 | Ø 30 mm | 16 bits per revolution | Shaft Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP54 … IP67 | Measuring range: 44 revolutions (15840°)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-hole shaft Ø30–50 H7 | Ø170 h5, anti-rotation pin | 18000–90000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (500 kHz optional)
Shopping Basket