F5C Wired Linear Transducer

Budget-friendly price Request a quote
Thread Ø 0.51 mm | Stroke 500, 750, 1000 or 1250 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Incremental option (I) | Supply 5, 12 or 24 V ±5 % | Linearity ±0.25 % fs | IP54

The ELCIS F5C is a linear transducer using 0.51 mm diameter wire, with a stroke of 0 to 1250 mm and potentiometer outputs of 1 kΩ, 4–20 mA, 0–10 V, 0–5 V or incremental (I, only up to 1000 mm stroke). Patented manufacturing.

Potentiometer output of 1 kΩ (W), 4÷20 mA (6), 0÷10 V (7), 0÷5 V (8) or incremental (I, only up to 1000 mm stroke and with 5 V or 24 V), with 5, 12 or 24 Vdc ±5 % power supply depending on the electronics. Infinite resolution and 0.1 mm in incremental mode; potentiometer temperature coefficient of ±100 ppm/°C and useful range as a voltage divider of ~3 % ÷ 97 %. Maximum linearity error of ±0.25 % fs, repeatability of ±0.15 % fs and maximum reading speed of 1 m/s.

Stainless steel cable, 0.51 mm diameter, with aluminum housing; pull-out forces <4.5 N and retraction forces <3.5 N; shock resistance of 50 G x 11 ms and vibration resistance of 12 G (10 ÷ 2000 Hz). IP54 protection rating for potentiometer and mechanical components; output: see connections. Mounting without bracket (N) or with bracket and wire exit at the top (A), right (D), or left (S); spring-loaded snap hook (carabiner) with pulley (G) and magnetic mounting options (M). Connection via 1 to 5 m cable (CV) or 4-pin CQ2 connector (IP66), or cable end connector (VM, TM, VL, TL, VD, VH, VH5, VI, VE, VK, TK, VN, VH6, VM5, VM9, VS, VD5).

  • Nominal careers of 500 mm, 750 mm, 1000 mm and 1250 mm, with stainless steel cable Ø 0.51 mm.
  • Departures 1 kΩ potentiometer, 4÷20 mA, 0-10 V, 0-5 V e incremental (this one, only up to 1000 mm and with 5 V or 24 V), powered by 5, 12 or 24 Vcc ±5 % according to electronics.
  • Extraction force <4.5 N and retraction <3.5 N.
  • Fixation N (without a set square) or TO, D and S (with square and upper thread exit, right or left); options G (spring hitch with pulley) and M (magnetic fixation).
  • Connection cable 1 to 5 m or connector at the end of the cable; IP54 in potentiometer and mechanics.

Technical Frequently Asked Questions

What types of output does the F5C transducer offer?

It offers a potentiometer of 1 kΩ (W), 4÷20 mA (6, only with 24 V ±5 % or 5÷30 V power supply), 0÷10 V (7), 0÷5 V (8) and incremental (I, only up to 1000 mm and with 5 V or 24 V).

What are the available nominal career paths?

The preferred values are 500 mm (050), 750 mm (075), 1000 mm (100) and 1250 mm (125).

What mechanical mounting options does it include?

It can be installed without a bracket (fixing N) or with a bracket and upper thread exit (A), right (D) or left (S); spring attachment options with pulley (G) and magnetic fixing (M).

Properties

FeatureSpecification
Mechanics
Nominal stroke0 ÷ 1250 mm (500, 750, 1000 and 1250 mm)
Cable length1 m (standard), 2, 3, 4 and 5 m
Weight330 g
Cable and housingStainless steel cable Ø 0.51 mm · aluminum casing
Electric
Output electronics1 kΩ potentiometer (W) · 4÷20 mA · 0÷10 V · 0÷5 V · Incremental (I)
Feeding5 Vcc ±5 % · 12 Vdc ±5 % · 24 Vdc ±5 % · 5÷30 V (530)
ResolutionInfinite; 0.1 mm (incremental)
Linearity / maximum repeatability.±0.25 % fs / ±0.15 % fs (customizable upon request)
Protection and environment
Maximum reading speed1 m/s
Degree of protectionPotentiometer: IP54 • Mechanical: IP54 • Output: see connections
Impact/vibration resistance50 G x 11 ms / 12 G (10 ÷ 2000 Hz)
Operating/storage temperature-20 ÷ +80 °C / -30 ÷ +80 °C (customizable upon request)
Other features
Forces on the cableExtraction <4.5 N • Retraction <3.5 N
PotentiometerThermal coefficient ±100 ppm/°C • Useful range of the voltage divider ~3 % ÷ 97 %
ELCIS F5C Linear Wire Transducer
Dimensional drawing of the ELCIS F5C linear cable transducer

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Adjustable metal supports | Stroke 10–450 mm | 1 kΩ (10–25 mm), 5 kΩ (remaining) | Linearity ±0.05 to ±0.3 % | Potentiometric output (divider) | Max. supply 60 V | IP40 (IP65 with option 3)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CAN SAE J1939 | Ø 48 mm | 14-bit resolution | Shaftless: magnetic placeholder | 12/24 VDC (8 … 34 VDC) | IP67 / IP68 / IP69 | 1 or 2 channels
Non-intrusive ultrasonic transit time meter for pipes from 15 to 6000 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Spindle Ø14 h6, housing Ø170 mm | Centering Ø140 h6 | 18000–900000 impedances/revolution | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 spindle (IP65 output with cable) | ±2.5″; 2200 kHz with interpolation
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø44 mm | Shaft Ø6 h7, centered Ø20 h7 | 1–2540 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP66 shaft (IP53 under torque) | 60 kHz (100 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental (with pinion encoder) | Pre-assembled for 12 encoders | Stroke 100 to 50,000 mm | Resolution 1 µm to 1 mm | Modules 1, 0.796 and 0.815 | C10 steel support | Optional laser certification (S/N)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Cantilever wheel, C = 200 mm | Wheel Ø63.66 mm with preload | 1 to 5000 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
Dimetix_AG-1
It measures up to ~100 m over natural surfaces and up to 150 m with a reflector, with a typical accuracy of ±3 mm @2σ and a frequency of up to 100 Hz. It is geared towards position and level applications where ±1 mm accuracy is not required.
Shopping Basket