Linear Cable Transducer F300D

Budget-friendly price Request a quote
Absolute, thread Ø 0.9 mm | Stroke up to 3 m | Resolution 0.1 or 1 mm | DeviceNet | 10–30 V DC | IP64 (IP65 connections) | Linearity ±0.05 % fs.

The ELCIS F300D is an absolute wired linear transducer, with 0.9 mm diameter wire and DeviceNet output, for measuring linear displacements up to 3 meters.

The electronics incorporate ASIC photodiodes with a 100,000-hour LED light source, a CAN transceiver (ISO 11898), status indication with 2 LEDs, and SMD technology. It is protected against reverse polarity and overvoltage, with an unbreakable encoder disc and EMC certification according to EN 50081-2 and EN 61000-6-2.

Encoder and mechanics IP64; the output IP rating depends on the connection: cable gland (3PG, 3PG-VA, 2M20) and 5-pin round connector (1BW) IP65. 98% humidity (no liquid present). Operating temperature -20 to +70 °C and storage temperature -40 to +85 °C. Weight 1.2 kg depending on the stroke.

  • Max. standard stroke 3 meters and resolution of 0.1 mm either 1 mm.
  • Interface DeviceNet (D2) with programmable parameters (rotation direction, total resolution, resolution per revolution and preset value).
  • Thread of stainless steel Ø 0.9 mm and half-life of >10⁶ cycles at 2 m/s.
  • Maximum linearity error of ±0.05 % fs., max. read speed of 4 m/s and max. acceleration of 2.5 G.
  • Encoder IP64; cable gland and 1BW connector IP65.

Technical Frequently Asked Questions

What communication interface does the F300D transducer have?

(D2) DeviceNet, with CAN transceiver (ISO 11898).

What career paths and resolutions does it offer?

Max. standard stroke of 3 meters, with resolutions of 0.1 mm (code 100) and 1 mm (code 1000) and binary output code.

What level of protection and connections does it have?

Encoder and mechanics IP64; cable glands 3PG, 3PG-VA and 2M20 and 5-pin round connector 1BW are IP65. The IP rating of the output depends on the connection.

Properties

FeatureSpecification
Mechanics
Max standard stroke.3 m
Race: traction threadØ 0.9 mm stainless steel
Race: forces on the cableExtraction 20 N · 10 N retraction
Race: max speed / acceleration.4 m/s / 2.5 G
Weight1,2 kg depending on the career
Electric
Resolution / Exit Code0,1 mm, 1 mm · Binary code
Maximum linearity error.±0.05 % fs.
Feeding and max. consumption.10÷30 V CC · 2.5 W
Output interface(D2) DeviceNet
Protection and environment
Average life expectancy>10⁶ cycles at 2 m/s
Impact/vibration resistance30 G (11 ms) / 10 G (10 ÷ 1000 Hz)
Degree of protectionEncoder and mechanics: IP64 · Cable gland and 1BW connector: IP65 · Output: according to connection
Operating/storage temperature-20 ÷ +70 °C / -40 ÷ +85 °C
Humidity98 % (without liquid present)
ReferenceConfiguration
F300D-B-1000-1030-3PGF300DB100010303PGBinary output code · 1 mm resolution · 10–30 V DC · 3 cable glands · IP65
F300D-B-100-1030-3PGF300DB10010303PGBinary output code · 0.1 mm resolution · 10–30 V DC · 3 cable glands · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS F300D Linear Cable Transducer
Dimensional drawing of the ELCIS F300D linear cable transducer

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Threaded flange 18×1 | Housing Ø40 mm, shaft Ø6 h7 (Ø8 optional) | 10–2500 rpm | NPN, push-pull, line driver | 5 V ±5 % or 12–24 V | IP52 shaft (IP65 with retainer, option Q) | Max. frequency 180 kHz
Humidity and temperature recorder
NESA Environmental Meters
Reed, 0÷2Vdc, 4÷20mA, RS485 / Modbus | Class A | 400 cm² | 0.2 mm/imp. | 0÷600 mm/h | 10÷30Vdc
LVDT Manufacturer Logo Schreiber Messtechnik
Amplified LVDT inductive sensor | Strokes 100 and 200 mm | Square housing 30×30 mm | Outputs 0/4–20 mA, 0–10 V and ±10 V | Linearity 0.25 % / 0.5 % | IP67 with suitable connector | Integrated electronics
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output 0.25…4.75 V | Ø 22mm | Resolution 16 bits | Shaft Ø 6 mm | 5 VDC (4.5 … 5.5 VDC) | IP50/IP65 | Measurement range: 44 turns (15840°)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | Stroke 50 … 4250 mm | SSI 24 and 25 bit | Resolution 1, 5 or 10 µm | Linearity ≤ ±25 … ±120 µm | 13 … 34 VDC | IP67 / IP68
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Ø 28 mm | Shaft Ø 6 mm or push-in coupling | Max. Ub 42 VDC | IP54 or IP65 | 100° to 345°, 1 or 2 channels
DPF Sensors logo
ATEX pressure transducer
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 10 … 300 mm | Linearity ≤ ±0.05 … ±0.25 % | Repeatability 0.01 mm | 42 V max. | -40 … +100 °C | Mounting by adhesive or clamping
DPF Sensors logo
Safety tilt controller for platforms.
Shopping Basket