EF150 Linear Cable Transducer

Budget-friendly price Request a quote
Thread Ø 0.5 mm, 10 m/s | Stroke up to 1500 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP43 mechanical)

The ELCIS EF150 is a linear transducer using a 0.5 mm diameter wire cable for measuring linear displacements, with a maximum useful stroke of 1500 mm, a resolution of 0.1 or 1 mm and the ability to find zero.

Stainless steel cable of Ø 0.5 mm with pull-out and pull-out forces of 6.4 N and 3.1 N. It offers incremental electronics (NPN, PNP, push-pull, 26LS31 or 88C30 driver, TTL 7404, 1 Vpp sinusoidal) or analog electronics (1 kΩ potentiometer, 4÷20 mA, 0÷10 V), max. frequency of 100 kHz, linearity of ±0.04 % fs, max. reading speed of 10 m/s and max. acceleration of 5 G.

IP64 encoder and IP43 mechanical encoder, operates from 0 to 70 °C (storage from -30 to 85 °C) and weighs 710 g. It is powered from 5 to 30 V according to the code and is connected by 1 m cable, connectors, cable end connectors or Phoenix terminal box, with protection between IP00 and IP67 depending on the connection.

  • Maximum useful stroke of 1500 mm.
  • Stainless steel cable Ø 0.5 mm; bearing life 1.5 × 10⁹ revolutions.
  • Exit incremental (NPN, PNP, push-pull, driver, TTL, sine 1 Vpp) either analog (1 kΩ, 4÷20 mA, 0-10 V).
  • Resolution of 0.1 mm either 1 mm with linearity of ±0.04 % fs.
  • Maximum reading speed 10 m/s and max. acceleration of 5G.

Technical Frequently Asked Questions

What measurement ranges and resolutions does the EF150 support?

It allows a maximum useful stroke of 1500 mm, with resolutions of 0.1 mm (code 100) and 1 mm (code 1000). Zero search is possible.

What electronics and power supplies does the EF150 offer?

NPN, PNP, push-pull electronics, 26LS31 or 88C30 driver, TTL 7404, 1 Vpp sinusoidal and analog (1 kΩ potentiometer, 4÷20 mA, 0÷10 V), with 5 to 30 V power supply depending on the code. With 88C30 driver, max. 15 Vdc.

What connections and protection ratings does the EF150 have?

IP64 encoder and IP43 mechanical components; output depends on the connection. Connection via 1 m CV cable (IP65), CM, SM, CL, SL, CD, CH, CH5, CI, CE, C4, and CH6 connectors (IP63 to IP67), cable end connectors (IP65 at the encoder output), or MS terminal box (IP00). Cable, connectors, and cable end connectors support axial or radial (R) output; the MS terminal box supports axial output only.

Properties

FeatureSpecification
Mechanics
Max. standard length.1500 mm (customizable upon request)
Bearing life1.5 × 10⁹ revolutions
Weight710 g
Electric
Resolution0,1 mm, 1 mm (customizable upon request)
Acceleration / Speed / Max Frequency.5 G · 10 m/s · 100 kHz
Maximum linearity error.±0.04 % fs (customizable upon request)
ElectronicsNPN, PNP, push-pull, driver 26LS31/88C30, TTL 7404, sinusoidal 1 Vpp, potentiometer 1 kΩ, 4÷20 mA, 0÷10 V
Feeding5 V, 12 V, 24 V (±5 %) or ranges of 8 to 30 V, according to code
Max. consumption.Standard 120 mA · Line driver 180 mA (customizable upon request)
ExitAxial or radial (R); MS axial-only terminal box
Light sourceLED with life ≥ 100000 h
Protection and environment
Degree of protectionEncoder: IP64 • Mechanical: IP43 • Outlet: according to connection (IP rating according to CEI EN 60529, EN 60529, IEC 529 standards)
Impact/vibration resistance50 G x 11 ms · 12 G (10 ÷ 2000 Hz)
TemperatureOperating temperature 0 ÷ 70 °C • Storage -30 ÷ 85 °C (customizable upon request)
Other features
Cable and traction forcesØ 0.5 mm, Stainless steel · Extension 6.4 N · Retraction 3.1 N
ReferenceConfiguration
EF150-5-BZ-Y-100-1-CL-REF1505BZY1001CLR5 V ±5 % · bidirectional + zero · Sinusoidal 1 Vpp · 0.1 mm · ×1 · 10-pin standard connector · IP65 · radial output
ELCIS EF150 Linear Cable Transducer
Dimensional drawing of the ELCIS EF150 linear cable transducer

Related documentation, cases, and guides

Other products

Dimetix_AG-1
It measures up to ~100 m over natural surfaces and up to 150 m with a reflector, with a typical accuracy of ±3 mm @2σ and a frequency of up to 100 Hz. It is geared towards position and level applications where ±1 mm accuracy is not required.
DPF Sensors logo
TSM-xxx Series
Monitran-Logo
Probe and driver in IP65 die-cast aluminum housing | Linear range 0 – 2 mm | Sensitivity 8 mV/µm nominal | DC to 10 kHz | Linearity 1% nominal | Power supply 24 V DC at 30 mA | Probe operating temperature -30 to 180 °C
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Current output 0…20 mA or 4…20 mA | Ø 55 mm | Shaft Ø 6 mm | 24 ±6 V DC | IP 65 | 90° or 345°
LVDT Manufacturer Logo Schreiber Messtechnik
Microcontroller-based LVDT | 5 to 15 mm range | M30x1.5 and 25x25 mm housings | IP67/IP66 | Scalable outputs | Threaded/lock mounting
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø6.35 h7 | Flange Ø56 mm | 1 to 600 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 Z-sealed) | 40 kHz (75 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow through shaft H7 up to Ø15 | Ø59 | Up to 8192 steps (13 bits) | Parallel NPN open collector | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP65 sealed) | Gray code only
DPF Sensors logo
High precision single axis solar tracking controller.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Section 18×46 mm | Stroke 70–1240 mm | Resolution 5, 1 and 0.5 µm (x4) | Line driver output (VD) | Power supply 5 V ±5 % | IP53 (IP64 with compressed air) | Accuracy ±10 µm (opt. ±5 µm)
Shopping Basket