VEM-100-F
Budget-friendly price Request a quote
VEM-100-F
Insertion flow meters
Properties
Range: 0.15 to 8 m/s
Signal 45 hz/m/sec.
Linearity 0.75%
Repeatability 0.5%
Body material PVC (PVCF optional)
Pressure: 10 bar at 25ºC >> 1.5 bar at 85ºC
PUSH-PULL SQUARE WAVE
Precision:0.8 m/s
Related documentation, cases, and guides
Other products
0÷70 m/s · 0÷360° | Triaxial UVW | ModBus RS485 or analog outputs | 12 ÷ 30 Vdc | 537 x 214mm | 1650g
CAN SAE J1939 | Ø 30 mm | 16 bits per revolution | Shaft Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP54 … IP67 | Measuring range: 44 revolutions (15840°)
4-20 mA proportional to RMS speed | Two-wire for PLC, DCS and controllers | 12-32 V DC | 2 Hz to 1 kHz ±10% | Faraday cage electronics | Stainless steel | IP67 (IP68 on 2285W, IP65 on 2285STC)
13-bit SSI, Gray code | Ø 28 mm | 12-bit resolution | Ø 6 mm shaft or press-fit coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67
Combined glass/gel reference pH electrode, epoxy body, size 75x12. with 1.5m BNC cable.
ORP probe by immersion in PVC tube. Length 720 mm. With SZ265 probe
High Capacity Inductive Torque Transducer (20,000 … 30,000 Nm)
Graphite Sensor with built-in PT-100, 3m Cable, K=1 cm⁻1 Range from 2MicroSiemens to 2,000 milliSiemens,
CANopen | 41.5 x 59 mm max. | 14-bit resolution | Shaftless: magnetic placeholder | 12/24 VDC (8 … 34 VDC) | IP67 / IP68 / IP69K | 1 or 2 channels