A/958SD Absolute Fieldbus Encoder
- Manufacturer: ELCIS Encoder
- Category: Encoder, Absolute Encoder, Absolute Encoder Fieldbus, SENSORS
The ELCIS 958SD (A/958SD) is a DeviceNet absolute encoder, single-turn and multi-turn (single-rotation and multi-rotation) with a Ø58 mm diameter, servo flange, and Ø6 shaft. It is servo-type mounted using front clips or screws.
The A/958SD features a DeviceNet (D2) interface and an ISO 11898 CAN transceiver with programmable transmission speed. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 1, 4096, or 16384 revolutions, with a maximum of 30 bits in binary code. It includes two status LEDs and SMD technology, with optical LED readout and an IR photodiode array ASIC.
Built with a Ø58 mm aluminum housing and a Ø6 f6 stainless steel shaft (Ø10 optional), it supports axial and radial loads of 40 and 110 N. It has IP64 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates from -40 to +85 °C.
- Interface DeviceNet (D2) with CAN transceiver ISO 11898.
- Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
- Programmable transmission speed and 2 LED of state.
- Nutrition 10–30 V DC with maximum consumption of 2.5 W.
Technical Frequently Asked Questions
What resolutions and revolutions can the A/958SD be configured for?
It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 1, 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.
What parameters are programmable in the DeviceNet interface?
Direction of rotation (complementary), total resolution, resolution per revolution, preset value and transmission mode: polled mode, cyclic mode or cos mode.
What connections are available?
3 IP65 cable glands (3PG), 3 IP65 steel cable glands (3PG-VA), 2 IP65 Ø 9–13 mm cable glands (2M20) and IP65 5-pin round connector (1BW).
Properties
| Feature | Specification |
|---|---|
| Mechanics | |
| Housing | Aluminum, Ø58 mm (customizable upon request) |
| Weight | 550 g single turn · 600 g multiturn |
| Axis | Ø6 f6 stainless steel (optional Ø10) |
| max. axial/radial load. | 40 / 110 N |
| Electric | |
| Exit-side protection | IP65 according to connection |
| Power supply / max. consumption. | 10–30 V DC · 2.5 W |
| Max frequency. | 800 kHz |
| Exit code | Binary |
| Division accuracy | ±½ LSB (<13 bit) ±2 LSB (13–16 bit) |
| Max resolution. | 16 bit/turn; 30 bits/16384 turns (≤65536 steps; ≤16384 turns) |
| Interface | DeviceNet (D2) · ISO 11898 CAN transceiver · programmable transmission speed |
| Protection and environment | |
| axle-side protection | IP64 standard · IP66 sealed |
| max. continuous RPM | 6000 standard · 3000 sealed (intermittent: +30 %) |
| Impact/vibration resistance | 30 G (11 ms) 10 G (10–1000 Hz) |
| Operating/storage temperature | -40 … +85 °C / -40 … +85 °C |
| Reference | Configuration |
|---|---|
| A/958SD-12-12-06-B-D2-0-3PGA958SD121206BD203PG | 4096 steps/rev. · revolutions: 4096 · shaft Ø6 mm · Binary · DeviceNet · 3 cable glands · IP65 |
| Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference. | |


Related documentation, cases, and guides
Other products









