A/958HS Multi-Turn Absolute Encoder

Budget-friendly price Request a quote
Ø58 mm, servo, Ø10 h8 shaft | Up to 30 bits in 16384 revolutions | SSI or SSI with preset (S1, S4) | RS422/RS485 line driver | 10–30 V power supply | IP64 shaft (IP66 sealed) | 800 kHz step frequency

The ELCIS 958HS (A/958HS) is a multi-turn SSI absolute encoder with a Ø58 mm housing, up to 30 bits in 16384 turns, with Gray code or binary output via RS422/RS485 line driver. In industrial environments, it is servo-mounted using front clips or screws, with a Ø10 h8 stainless steel shaft (Ø6 optional) that withstands 40 N radial and 110 N axial forces, standard IP64 or sealed IP66 protection, resistance to 30 G of impact and 10 G of vibration, and operation between -40 and +85 °C (with cable: -5…+70 °C).

The A/958HS is a multi-turn absolute encoder with optical readout via an IR photodiode array. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions. It transmits position via an SSI serial interface (RS422 line driver) with a clock frequency of 100 kHz to 1 MHz, in Gray code or binary code, and is available in preset (S1) and preset push-button (S4, with radial output only) variants.

Manufactured with a Ø58 mm aluminum body and a Ø10 h8 stainless steel shaft (Ø6 optional), it supports radial loads of 40 N and axial loads of 110 N. It features standard IP64 or sealed IP66 protection, withstands impacts of 30 G and vibrations of 10 G, and operates in a thermal range of -40 to +85 °C (with cable: -5 to +70 °C).

  • Maximum resolution of 30 bit in 16384 turns.
  • Serial interface SSI with line driver RS422 and watch 100 kHz a 1 MHz.
  • Variants with preset function (S1) or with a preset button (S4, (radial output only).
  • Temperature range of -40 a +85 °C with protection up to IP66.

Technical Frequently Asked Questions

What resolutions and turns does the A/958HS offer?

It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.

What are the differences between the SSI interface options (SL, S1, and S4)?

The SL is the standard SSI interface. The S1 is the same as the SL, but with a preset function. The S4 is the same as the SL, but with a preset button, and is only available with a radial output.

What connectors and cables are available?

It is supplied with a 1 m cable with IP65 rating in axial (CAW) or radial (CRW) output, or with 12-pin circular connectors with IP65 rating in axial (PAL) or radial (PRL) configuration.

Properties

FeatureSpecification
Mechanics
HousingAluminum (customizable upon request)
Weight300 g
AxisØ10 h8 stainless steel (optional Ø6)
max radial/axial load.40 / 110 N
Electric
Exit-side protectionIP65 according to connection
Feeding10–30 V DC
Max. consumption.1 W (SL) · 1.5 W (S1)
LSB pitch frequency800 kHz
Exit codesGray, Binary
Max resolution.30 bit / 16384 laps
Interface / OutputSSI (SL), SSI + preset (S1/S4) · line driver RS422/RS485
Protection and environment
axle-side protectionIP64 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C (with wired output: -5…+70 °C)
ReferenceConfiguration
A/958HS-12-12-10-G-SL-0-PRLA958HS121210GSL0PRL4096 steps/rev. · revolutions: 4096 · standard Ø10 mm shaft · Gray · SSI · 12-pin radial connector · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/958HS Multi-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/958HS multi-turn absolute encoder

Related documentation, cases, and guides

Other products

Pesacam logo: Weighing systems for trucks
Onboard scale | Air suspension | In-cab indicator | Wired connection | 2 or 3 sensors | Manufactured in Bellvei (Tarragona)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø10 | Ø59, star coupling | Up to 2048 steps (11 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø58 mm | Shaft Ø10 h7 stainless steel | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft, IP66 sealed | Radial/axial load 4 kg
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø75, 90, 100, 110, 125 | Housing Ø250 mm | 400, 420 … 2304 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP54 shaft side | Internal tangential coupling
DPF Sensors logo
Portable 2-axis digital inclinometer | ±90° | Accuracy ±0.05° | Resolution 0.01° | Color LCD display | Magnetic mounting | USB | IP54
ATESTEO LOGO, manufacturer of torque sensors
Change Analysis | ±200 N (Optional 500 N) | ±125 mm (Optional 150 mm) | 400 kHz Sampling | 8 Channels
Pesacam logo: Weighing systems for trucks
Onboard scale | Bluetooth to Android and iOS app | Wireless to cabin | 3 sensors | Manufactured in Bellvei (Tarragona)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
CANopen (C2) or fiber optic (CF) | B10 flange, Ø11 h7 shaft | 16 bit; 30 bit in 16384 turns | Up to 1 Mbaud | 10–30 V DC | IP65 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø6.35 h7 | Flange Ø56 mm | 1 to 600 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 Z-sealed) | 40 kHz (75 kHz optional)
DPF Sensors logo
TSM-xxx Series
Shopping Basket