Robust Incremental Encoder I/90

Budget-friendly price Request a quote
Housing Ø90 mm, servo flange | Shaft Ø10 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (300 kHz optional)

The ELCIS 90 (I/90) is a robust incremental encoder with a 90 mm diameter, all-metal housing and servo-type mounting flange. It supports NPN, PNP, push-pull, 26LS31 and 88C30 drivers, TTL, discriminator, and 1 Vpp sinusoidal electronics, in unidirectional, bidirectional, and zero-stop versions, with a maximum frequency of 100 kHz (300 kHz optional). It features an anodized aluminum base and cover, and a 10 mm diameter stainless steel shaft capable of supporting 10 kg of radial and axial load. Operating from 0 to +70 °C, it offers IP65 protection on the shaft side (IP66 sealed, IP53 under torque) and can be connected via cable, connector, cable end connector, or terminal box (IP00).

Housed in a Ø90 mm metal casing, the I/90 supports NPN, PNP, push-pull electronics, 26LS31 and 88C30 drivers, TTL, discriminator and 1 Vpp sinusoidal, in unidirectional, bidirectional and zero versions, with a maximum frequency of 100 kHz (300 kHz optional).

Anodized aluminum base and cover and Ø10 stainless steel shaft that supports 10 kg of radial/axial load. It operates from 0 to +70 °C with IP65 protection on the shaft side (IP66 sealed, IP53 under torque) and is connected by cable, connector, cable end connector or terminal box.

  • Resolution of 1 to 25000 pulses per lap and frequency up to 100 kHz (300 kHz optional).
  • Nutrition 5 to 30 V according to the version.
  • 15 electronic Output: NPN, PNP, push-pull, 26LS31 and 88C30 drivers, TTL, discriminator and sinusoidal 1 Vpp.
  • Until 12000 rpm continuous with low torque bearings and 6000 rpm in standard version.
  • MTTFd high according to UNI EN ISO 13849-1.

Technical Frequently Asked Questions

What signal versions does the I/90 offer?

Unidirectional (M), bidirectional (B), bidirectional + zero (BZ) and unidirectional + zero (MZ).

What supply voltages does it support?

5 V ±5 %, 8–24 V, 18–28 V, 8–15 V, 12 V ±5 %, 24 V ±5 %, 12–30/12 V, 8–24/5 V, 10–30 V, 18–28/5 V and 15–30/15 V. With 88C30 driver, maximum 15 Vdc.

What axle protection options are available?

IP65 in standard version, IP66 with sealed bearing (option Z, 3000 rpm continuous) and IP53 with low torque bearings (option B, 12000 rpm continuous).

Properties

FeatureSpecification
Mechanics
HousingMetal Ø90 mm, servo type flange
Weight600 g
AxisØ10 h7 stainless steel (customizable upon request)
max radial/axial load.10 kg
bearing life1.5 × 10⁹ revolutions
Electric
Exit-side protectionAccording to connection: IP00 to IP67 (see technical data sheet)
Feeding5–30 V according to version (see technical specifications)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap1 to 25000
Max frequency.100 kHz (300 kHz optional)
Protection and environment
axle-side protectionIP65 standard • IP66 sealed (Z) • IP53 low torque (B)
max. continuous RPM6000 standard · 3000 sealed · 12000 low torque (intermittent: +30 %)
Impacts / vibration50 G × 11 ms · 12 G (10–2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/90-200-1828-BZ-L-CLI902001828BZLCL200 pulses/revolution · 18–28 V · bidirectional + zero · 2× push-pull PRO · 10-pin standard connector · IP65 · axial output
I/90-20000-18285-BZ-N-CLI902000018285BZNCL20000 pulses/revolution · 18–28/5 V · bidirectional + zero · Driver 26LS31 · 10-pin standard connector · IP65 · axial output
I/90-5000-5-BZ-N-CL-RI9050005BZNCLR5000 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · 10-pin standard connector · IP65 · radial output
I/X90-2000-5-BZ-B-CM-RIX9020005BZBCMRCustom option · 2000 pulses/revolution · 5 V ±5 % · Bidirectional + zero · Push-pull PRO · Standard 7-pin connector · IP65 · Radial output
I/Y90-1000-5-BZ-N-CL-RIY9010005BZNCLRUnbreakable disc · 1000 pulses/revolution · 5 V ±5 % · Bidirectional + zero · Driver 26LS31 · Standard 10-pin connector · IP65 · Radial output
Robust incremental encoder ELCIS I/90
Dimensional drawing of the ELCIS I/90 robust incremental encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □80, centered Ø40 h7 | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | IO-Link V1.1, COM 3 | Stroke 50 … 4250 mm | Resolution 1 or 5 µm | 1 to 3 position markers | 18 … 30 VDC | 350 bar · IP67 / IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □63.5, shaft Ø9.52 h7 | Up to 1024 steps (10 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP54 shaft (IP65 sealed) | Gray or Excess
ATESTEO LOGO, manufacturer of torque sensors
Digital PCM Transmission | 30,000 – 50,000 N·m | 10,000 RPM | PCD Flange 290.0 mm | Inertia 0.5695 kg·m²
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | SSI 24 and 25 bit | Stroke 50 … 4250 mm | Resolution 1, 5 or 10 µm | Linearity ≤ ±25 … ±120 µm | 13 … 34 VDC | 350 bar · IP67 / IP68
Disibeint Electronic, manufacturer of level sensors and control relays
MAGNETIC LEVEL SWITCHES VARIABLE LENGTH
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CAN SAE J1939 | 41.5 x 59 mm max. | 14-bit resolution | Shaftless: magnetic placeholder | 12/24 VDC (8 … 34 VDC) | IP67 / IP68 / IP69K | 1 or 2 channels
Monitran-Logo
100 mV/g ±10 % (IEPE) | 2 Hz to 15 kHz ±5 % | 30 g | -55 to 140 °C | Ø15 mm body | 5 m integral ETFE cable | Stainless steel, IP67
DPF Sensors logo
Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
NESA Environmental Meters
2 x 4÷20mA, RS485/Modbus | 0 ÷ 90 m/s · 0 ÷ 360° | 4 ultrasonic cells | 162 x 320mm | 10÷30Vdc | IP65
Shopping Basket