Incremental Encoder for Racks I/62C

Budget-friendly price Request a quote
Pinion with 13, 16, or 34 teeth or Ø8 shaft | Ø62 mm housing, without preload | 1 to 10,000 impedances/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft side | Max. frequency 60 kHz (100 options)

The ELCIS 62C (I/62C) is an incremental encoder with a pinion and housing Ø62 mm, from 1 to 10,000 pulses per revolution. It is similar to the model 172C, but without a pinion preload system.

The I/62C offers 1 to 10,000 pulses per revolution, a maximum frequency of 60 kHz (100 kHz optional), and NPN, PNP, push-pull, TTL 7404 electronics, 26LS31 and 88C30 drivers, and a 1 Vpp sine wave output. It is powered by a voltage between 5 and 30 V depending on the version.

Anodized aluminum base and cover and stainless steel pinion, with 13, 16 or 34 tooth pinions or Ø8 shaft. Supports 4 kg radial/axial load, works from 0 to +70 °C with IP66 protection on the shaft side and is connected by a 1 m cable with a connector at the end of the cable, with radial output.

  • Encoder with pinion, similar to mod. 172C, without pinion preload system.
  • Resolution of 1 to 10000 pulses per lap and frequency up to 60 kHz (100 kHz optional).
  • Stainless steel pinion 13, 16 either 34 teeth, or axis of Ø8.
  • Nutrition 5 to 30 V depending on the version and electronics: NPN, PNP, push-pull, TTL 7404, 26LS31 and 88C30 drivers and sinusoidal 1 Vpp.

Technical Frequently Asked Questions

What pinions does the I/62C accept?

13-tooth pinion (B), 16-tooth pinion (C) or 34-tooth pinion (D), or Ø8 shaft (A).

What connections does it offer?

1 m cable (CV) or cable end connector; the output is radial.

What is the maximum frequency it supports?

60 kHz as standard; 100 kHz with option V (75 kHz with option R).

Properties

FeatureSpecification
Mechanics
HousingØ62 mm
Weight200 g
PinionStainless steel, without preload system (see "Possible Sprockets")
max radial/axial load.4 kg
Electric
Exit-side protectionAccording to connection: IP65 (see technical specifications)
Feeding5–30 V according to version (see technical specifications)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap1 to 10000
Max frequency.60 kHz (100 kHz optional)
Protection and environment
axle-side protectionIP66 standard (without sealing or low torque options)
max. continuous RPM3000 (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/62CB-1021-5-BZ-N-CV-R-01I62CB10215BZNCVR011021 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · Cable · IP65 · radial output
I/62CB-1021-824-BZ-P-CV-R-02I62CB1021824BZPCVR021021 pulses/turn · 8–24 V · bidirectional + zero · PNP · Cable · IP65 · radial output
I/62CB-2042-5-BZ-N-CV-R-01I62CB20425BZNCVR012042 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · Cable · IP65 · radial output
I/62CC-100-5-B–CV-RI62CC1005BCVR100 pulses/revolution · 5 V ±5 % · bidirectional · standard NPN · 1 m cable · IP65 · radial output
I/62CD-267-824-BZ-B-VM-R-01I62CD267824BZBVMR01267 pulses/revolution · 8–24 V · bidirectional + zero · Push-pull PRO · Cable with standard 7-pin connector · radial output
I/G62CD-534-5-BZ-N-TL-R-01IG62CD5345BZNTLR01Tropicalization · 534 pulses/revolution · 5 V ±5 % · Bidirectional + zero · Driver 26LS31 · Cable with 10-pin sealed connector · Radial output
Incremental encoder for racks ELCIS I/62C
Dimensional drawing of the incremental encoder for ELCIS I/62C racks

Related documentation, cases, and guides

Other products

DPF Sensors logo
Miniature size wire displacement sensor, ranges from 100 to 350 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
30 mm square flange | Housing Ø27 mm, shaft Ø6.35 h7 | 50–800 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz
Dimetix_AG-1
Air-cooling jacket | Continuous forced cooling with compressed air | For Dimetix D-Series laser sensors | High-temperature environments: steel mills and foundries
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 10 … 200 mm | Linearity ±0.05 … ±0.25 % | Repeatability 0.01 mm | 42 V max. | IP54 | Cable or M8 connector
DPF Sensors logo
TSM-xxx Series
Monitran-Logo
1100 pC/g ±10% | -55 to 250 °C | ±100 g | Integrated TNC connector | Stainless steel, IP65 | Requires charge amplifier
Differential pressure switch for air
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø104 mm, hollow shaft H7 | Torque or pivot support | 100 to 2048 impedances/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP65 shaft (IP66 sealed) | CE Ex II 3GD, category 3
DPF Sensors logo
SIL Pressure. Liquids.
Monitran-Logo
Charging output 5, 20 or 50 pC/g | -55 to 250 °C | Up to ±2000 g | From 7 g | Stainless steel, IP65/IP66 | Requires charging amplifier
Shopping Basket