Incremental Encoder for Motors I/59

Budget-friendly price Request a quote
Hollow shaft Ø6–10 mm | Housing Ø59 mm | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Patented flare flange

The ELCIS 59 (I/59) is a 59 mm diameter incremental encoder with a patented flare flange and a pulse width of 1 to 25,000 pulses per revolution. It shares the same characteristics as the 72 model and allows the encoder body to be rotated on its axis to align the electrical zero with the mechanical zero. Different flanges are available as an option.

The maximum compensation of the coupling is axial ±3 mm, radial ±0.05 mm and angular ±2°. The base is made of anodized aluminum, the cover of Valox 420 and the hollow shaft of stainless steel, from Ø6 to Ø10 mm; the weight is 520 g.

It offers 1 to 25,000 pulses per revolution with a maximum frequency of 100 kHz (160 or 300 kHz with the S and W options), a 5–30 VDC power supply, and a 1 Vpp sinusoidal output between its electronics. The shaft side is IP64 as standard and IP66 with a sealed bearing (Z option, 3,000 rpm max. continuous); the output side ranges from IP63 to IP67 depending on the connection.

  • Patented flared flangeThe encoder body rotates on its axis to align the electrical and mechanical zero.
  • Hollow stainless steel shaft: Ø6, Ø8, Ø9.52 or Ø10 mm; other diameters available upon request.
  • From 1 to 25000 imp/v: max. frequency 100 kHz; 160 kHz with option S and 300 kHz with option W.
  • Electronics: NPN, PNP, Push-pull, TTL, Line Driver 26LS31 or 88C30 and sinusoidal 1 Vpp.

Technical Frequently Asked Questions

What advantage does the flared flange of the I/59 encoder offer?

It is a patented flange that allows the encoder body to rotate on its axis to align the electrical zero with the mechanical zero.

What resolutions does the I/59 model support?

From 1 to 25,000 pulses per revolution. The maximum frequency is 100 kHz as standard, 160 kHz with the S option, and 300 kHz with the W option.

What materials make up the enclosure of the I/59 encoder?

Anodized aluminum base, Valox 420 lid and hollow stainless steel shaft; weighs 520 g.

Properties

FeatureSpecification
Mechanics
HousingAnodized aluminum (base) and Valox 420 (lid)
Weight520 g
AxisHollow shaft Ø6÷10 mm in stainless steel (customizable upon request)
max. axial/radial load.6 kg
Bearing life1.5 × 10⁹ revolutions
Electric
Exit-side protectionDepending on the connection: IP63 to IP67 (see technical data sheet)
Feeding5÷30 Vcc (see technical specifications)
Max. consumption.120 mA (standard) / 180 mA (line driver) (customizable upon request)
Impulses per lap1 to 25000
Max frequency.100 kHz (160 or 300 kHz optional)
Protection and environment
axle-side protectionIP64 standard / IP66 sealed (option Z)
max. continuous RPM6000 rpm (standard) / 3000 rpm (option Z) (max. intermittent rpm: +30 % of the max. continuous rpm)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10 ÷ 2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
ReferenceConfiguration
I/59-500-824-BB-CM-RI59500824BBCMR500 pulses/revolution · 8 ÷ 24 V · bidirectional · Push-pull pro · 7-pin connector · IP65 · radial output
I/5910-1000-1828-BZ-B-VM-R-0.5I591010001828BZBVMR0510 mm diameter shaft · 1000 pulses/revolution · 18 ÷ 28 V · bidirectional with zero · Push-pull pro · Cable with standard 7-pin connector · radial output
I/5910-500-824-BZ-B-CW-R-01I5910500824BZBCWR0110 mm diameter shaft · 500 pulses/revolution · 8 ÷ 24 V · bidirectional with zero · Push-pull pro · Cable · IP65 · radial output
I/598-500-824-BZ-B-CW-R-01I598500824BZBCWR018 mm diameter shaft · 500 pulses/revolution · 8 ÷ 24 V · bidirectional with zero · Push-pull pro · Cable · IP65 · radial output
Incremental encoder for ELCIS I/59 motors
Dimensional drawing of the incremental encoder for ELCIS I/59 motors

Related documentation, cases, and guides

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 25 … 300 mm | Linearity ≤ ±0.05 … ±0.2 % | Repeatability ≤ ±0.01 mm | Ø 16 mm | IP67 | M8 cable or connector
ATMOSPHERIC pressure transducer
NESA Environmental Meters
Support arms | 50, 90 and 150 cm | Ø 25 mm | Post Ø max. 80 mm | Anodized aluminum | Pole or wall mounted
ATESTEO LOGO, manufacturer of torque sensors
100 · 200 · 500 N·m | Clase 0,04 % | 21 000 rpm (25 000 opc.) | Rotor Ø107 mm | Taladros 84,0 mm | RS422, tensión, bus CAN
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø27 mm | Solid shaft Ø6.35 h7 | 50–800 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz
Monitran-Logo
4-20 mA ∝ rms speed | 0-10 to 0-100 mm/s | 2 Hz to 1 kHz ±10 % | Ex ia I Ma | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32 V DC | Stainless steel, IP67 (IC) or IP68 (IW, submersible) | Group I (mining)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive, non-contact | CANopen DS-406 | Stroke 50 … 2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC (8 … 34 VDC) | 350 bar · IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø15, 16 or 20 mm | Housing Ø59 mm | 1 to 3600 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP65 sealed) | Internal tangential coupling
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø63 mm | Shaft Ø6 h7 stainless steel | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft, IP66 sealed | Option 1 Vpp sinusoidal
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø9.52 h7 | Square flange 63.5 mm | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP65 shaft (IP66 Z-seal) | 100 kHz (300 kHz optional)
Shopping Basket