Single-turn Absolute Encoder A/358HJ

Budget-friendly price Request a quote
Housing Ø58, shaft Ø10 h7 | Up to 1024 steps (10 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP54 shaft (IP65 sealed) | Gray or Excess

The ELCIS 358HJ (A/358HJ) is a patented, 2-to-10-bit optical single-turn absolute encoder.

It is optical, with an LED source and phototransistors, and delivers the position in Gray or Excess code, up to 1024 steps per revolution (10 bits). The output is parallel; serial SSI (RS422), only with Gray or Excess code; or analog in current or voltage (0–10 V) with 10 bits of resolution.

It has a composite material base, a Valox 420 cover and a Ø10 h7 stainless steel shaft for 2 kg of radial/axial load, withstands 50 G impacts and 12 G vibrations, and works between 0 and +60 °C with IP54 protection on the shaft side (IP65 in the sealed version).

  • Resolution of 2 to 10 bits: until 1024 steps per lap.
  • Five power ranges: 5 V and 15 V ±5 %, 8–24 V, 18–28 V and 10–30 V.
  • Analog output of 10 bits, in current or in 0–10 V in 360°.
  • Serial output SSI with transmission RS422, just with code Gray either Excess.

Technical Frequently Asked Questions

What resolutions does the A/358HJ offer?

In Gray code, 8, 16, 32, 64, 128, 256, 512 or 1024 steps per revolution; in Excess, 180, 360 or 720. Other resolutions available upon request.

What limitations does analog output have?

Converts the 10-bit position (1024 div/revolution) into an analog current or voltage (0–10 V) for 360° of rotation. Available only with 15 V or 18–28 V power supply and 1024 resolution.

What connections does the A/358HJ support?

1 m cable (CV, IP65), 26-pin connector PT02A16-26P (CM5, IP65), 10-pin MS310A18-1P (CL, IP65) and 25-pin DB25P (CD4, IP64), with radial output (R).

Properties

FeatureSpecification
Mechanics
HousingØ58 mm
AxisØ10 h7 Stainless steel (other diameters available upon request) (customizable upon request)
max radial/axial load.2 kg
Electric
InterfaceParallel (standard) · SSI (RS422) · analog current or voltage
Exit-side protectionIP64 to IP65 according to connection
Feeding5 V ±5 % · 15 V ±5 % · 8–24 V · 18–28 V · 10–30 V
Max. consumption.200–400 mA according to number of bits (customizable upon request)
Max frequency.50 kHz (customizable upon request)
Direction of rotationSwitchable (up/down)
Exit codesGray, Excess
Max resolution.1024 steps/turn (10 bit)
Protection and environment
axle-side protectionIP54 standard · IP65 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance50 G (11 ms) 12 G (10–2000 Hz)
Operating/storage temperature0 … +60 °C / -30 … +85 °C (customizable upon request)
ReferenceConfiguration
A/358HJ-G-1024-1828-KP-CD4-R+VD4FA358HJG10241828KPCD4R+VD4FGray · 1024 steps/revolution · 18–28 V · NPN open emitter + PTC · 25-pin DB25P · IP64 · radial output
ELCIS A/358HJ Single-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/358HJ single-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Square flange □110 mm | 100 imp/revolution with interlock | 1–2500 imp/revolution (option F) | NPN, PNP, push-pull, driver | Power supply 5–30 V depending on version | IP65 shaft side (output IP53–IP67)
DPF Sensors logo
1-Axis Precision Digital Inclinometer | DFI820-15 ±15° / DFI820-30 ±30° | Accuracy <0.005° / <0.01° | Resolution 0.001° | Color LCD | USB | IP54
NESA Environmental Meters
PM2.5 · PM10 | 0÷1000 µg/m³ | Laser scattering | 2 x 4-20mA or ModBus RTU485 | 10 ÷ 28Vdc | IP53 | 120 × 95 × 70 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □80, centered Ø40 h7 | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
LVDT Manufacturer Logo Schreiber Messtechnik
Amplified LVDT inductive sensor | Strokes 5, 10 and 15 mm | M30×1.5 thread | Outputs 0/4–20 mA, 0–10 V and ±10 V | Linearity 0.25 % / 0.5 % | IP66/IP67 depending on version | Optional probe and bellows
DPF Sensors logo
Clinometer for use in civil works, geology
Monitran-Logo
100 mV/g ±10% (IEPE) | 2Hz to 12kHz ±5% | ±50g | 40g | -25 to 120°C | C5015 2-pin connector | Ø19 mm base | Stainless steel, IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø8 h7 | 80 mm square flange | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z-seal) | Max. frequency 60 kHz
NESA Environmental Meters
0÷70 m/s · 0÷360° | Triaxial UVW | ModBus RS485 or analog outputs | 12 ÷ 30 Vdc | 537 x 214mm | 1650g
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
pH probe for immersion in PVC tube. Length 720 mm.
Shopping Basket