DPFS-xxx

Industrial laser sensor for measuring up to ~100 m directly on natural surfaces and up to 150 m with reflector, with ±1 mm @2σ and up to 100 Hz.

8 RTD (3H) multiplexer to 4/20mA output (Active/Passive)

Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)

58 mm square flange | Resolution up to 8192 steps/revolution (13-bit) | Gray, Binary, Excess, and BCD codes | Parallel, SSI, or analog (mA/V) output | Power supply: 5 V, 15 V, 8–24 V, 18–28 V, or 10–30 V | Ø6 h7 stainless steel spindle | Max. radial/axial load: 2 kg | Shaft-side protection: IP64 (IP66 sealed) | Max. continuous speed: 6000 rpm (8000 rpm under torque) | Operating temperature: 0…+70 °C

Power supply 5-30V | Weight 980g | Shaft Ø12mm | Max Load 12kg | RPM 6000 | Starting Torque 100/160gcm | Bearing Life 1.5×10^9 revolutions | Impact Resistance 50G | Vibration 12G | Operating Temperature 0-70°C

LVDT with Electronics | Square Body 30×30 mm | Stroke 100 mm and 200 mm | Output 4-20mA / ±10V | IP67 Protection | Frequency 800 Hz | PCD Mounting 40.0 mm

Housing Ø59 mm | Shaft Ø6 h7 stainless steel | 1 to 25000 pulses/revolution | Max. frequency 100 kHz | Power supply 5–30 V | Outputs NPN, PNP, push-pull, line driver and TTL | IP64 shaft side (IP66 sealed) | 6000 rpm continuous | Weight 300 g | Cable output with 1 m connector at cable end

Aluminum housing with 63 mm square flange | CANopen (C2) or CAN fiber optic (CF) interface | Max. transmission speed 1 MBaud | Max. resolution 16 bits/revolution · 30 bits in 16384 revolutions | Binary output code | Power supply 10–30 V DC, max. consumption 2.5 W | Ø10 h8 shaft in stainless steel | Max. radial/axial load 40/110 N | IP64 protection on shaft (IP66 sealed) | Operating temperature -40 … +85 °C

Long-range industrial laser sensor (100 m without reflector / 500 m with reflector / ±3 mm / 250 Hz)

Static torque sensor, ranges up to 10000 Nm, with 2 mv/v output signal