DPF-AOCO2

Budget-friendly price Request a quote
Analog-digital CO2 Controller Sensor, with ModBus RS485 communication, for OUTDOORS

Analog-digital CO2 Controller Sensor, with ModBus RS485 communication, for OUTDOORS
With ModBus RS485 communication, 0-10 Vdc analog output + 8 amp NA relay.
Co2 range: ….4000 ppm
Power supply: 9…24 Vdc

Properties

Other products

ATESTEO LOGO, manufacturer of torque sensors
500 · 1000 N·m | Clase 0,05 % | 15 000 rpm (25 000 opc.) | Rotor Ø122 mm | Taladros 101,5 mm | RS422, tensión, corriente, bus CAN
Monitran-Logo
100 mV/g ±10% | 2 Hz to 8 kHz ±10% | ±80 g | 3-wire, -24 V DC power supply | -55 to 140 °C | 3-pin 62GB connector or ETFE cable | IP67
DPF Sensors logo
Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output 0.25…4.75 V | Ø 22mm | Resolution 16 bits | Shaft Ø 6 mm | 5 VDC (4.5 … 5.5 VDC) | IP50/IP65 | Measurement range: 44 turns (15840°)
DPF Sensors logo
AMPER-O-RS, AC/DC (TRMS) to RS485 Modbus + 0/10V current transformer, with isolation, high precision. 0…25…50 A
NESA Environmental Meters
Natural output in µV (2 signals) | 0 ÷ 1300 W/m² | 0.3 ÷ 3 µm | Two Class II pyranometers | 125 x 105 mm | < 980 g
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo-type clamping Ø90 | Centering Ø80 h7 and Ø40 h7 | Ø12 h7 stainless steel shaft | 1 to 3600 impedances/revolution | NPN, push-pull, line driver, TTL | 5–30 V power supply | IP65 shaft (IP66 with Z-seal)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø38 mm | Shaft Ø6.35 h7, centered Ø33 h7 | 1–2540 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
DPF Sensors logo
6 potentiometer SETPOINTS (precision adjustable), externally selectable via contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential-free) without power supply
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø10 h8 shaft | Up to 30 bits in 16384 revolutions | SSI or SSI with preset (S1, S4) | RS422/RS485 line driver | 10–30 V power supply | IP64 shaft (IP66 sealed) | 800 kHz step frequency
Shopping Basket