DMM-Diff

Square flange □58, shaft Ø6 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed) | Gray, Binary, Excess or BCD

Customer's shaft and bearings | Housing Ø68 mm | 1 to 1250 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP00 shaft side (standard) | Up to 60 kHz

Pinion, steel HRC 10-15 | Stroke 800 to 34000 mm | Incremental, resolution 40 µm–1 mm | Output NPN, PNP, push-pull or driver | Power supply 5, 12, 24 V or 8–24 V | IP65 in CV connection | Max. error ±0.2 mm non-cumulative

Ø58 mm, servo, Ø6 f6 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz

Electrochemical sensor | From 1% to 100% | Titanium and Zinc | 4–20 mA, RS485/MODBUS RTU | Up to 10 bar

Incremental output | Square flange □45 mm | 100 imp/revolution with latching | 1–2500 imp/revolution (option F) | NPN, PNP, push-pull, driver | 5 V or 8–28 V depending on version | IP64 shaft side (IP65 cable)

Contactless, 45×45 mm housing | Hollow shaft Ø4–10 mm with magnet | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP67 shaft | 30000 rpm, 600 kHz

Square flange 63, shaft Ø9.52 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr

Incremental wire encoder for travels of 6, 8, 10 and 12 m, resolution of 0.1 to 1 mm/pulse and Push-Pull or Line Driver output.

Rain and/or snow detector