Low-frequency accelerometer with response from DC Monitran MTN/7100

Budget-friendly price Request a quote
Response from DC (0 Hz) | Sensitivity 0.6-20 mV/g depending on the range | Ranges from ±1 to ±50 g | Power supply 5 V DC | -20 to +90 °C | Stainless steel | IP65

El Monitran MTN/7100 es un acelerómetro de baja frecuencia de uso especial, con salida lateral y respuesta de salida desde CC (0 Hz). Tiene una sensibilidad de 0,6-20 mV/g según el rango (con datos de calibración suministrados con el sensor), se alimenta con 5 V DC y responde, según el rango dinámico (±5%), desde CC hasta 250 Hz (±1 g y ±2 g), 300 Hz (±5 g), 500 Hz (±10 g), 700 Hz (±20 g) y 1 kHz (±50 g).

Está fabricado íntegramente en acero inoxidable compacto, sellado IP65, con cable integral de PVC con trenza exterior de acero inoxidable, base aislada y una temperatura de funcionamiento de -20 a +90 °C. La serie incluye los modelos MTN/7100 y MTN/7110 (cuatro puntos), MTN/7120 (un punto, ¼" UNF), MTN/7120F (un punto, 10-32 UNF) y MTN/7120Q (un punto, Quickfit). Guemisa es distribuidor oficial de Monitran en España.

Key points

  • Respuesta desde CC: ±1 g y ±2 g hasta 250 Hz, ±5 g hasta 300 Hz, ±10 g hasta 500 Hz, ±20 g hasta 700 Hz y ±50 g hasta 1 kHz (±5%)
  • Sensibilidad de 0,6-20 mV/g según el rango, impedancia de salida de 3000 Ω, ruido eléctrico de 10 µg y límites de aceleración de x20 en cualquier dirección
  • Cinco modelos de montaje: cuatro puntos pequeño (MTN/7100) y grande (MTN/7110), y un punto ¼" UNF (MTN/7120), 10-32 UNF (MTN/7120F) y Quickfit (MTN/7120Q)

Technical Frequently Asked Questions

¿Qué respuesta en frecuencia tiene el Monitran MTN/7100 según el rango?

Responde desde CC (0 Hz) hasta 250 Hz en ±1 g y ±2 g, 300 Hz en ±5 g, 500 Hz en ±10 g, 700 Hz en ±20 g y 1 kHz en ±50 g (±5%); su sensibilidad es de 0,6-20 mV/g según el rango.

¿Qué modelos de montaje tiene la serie MTN/7100?

MTN/7100 (cuatro puntos, pequeño, requiere 4 tornillos M3), MTN/7110 (cuatro puntos, grande), MTN/7120 (un punto ¼" UNF), MTN/7120F (un punto 10-32 UNF) y MTN/7120Q (un punto Quickfit).

¿Qué temperatura y protección admite el MTN/7100?

Temperatura de funcionamiento de -20 a +90 °C (almacenamiento de -40 a 125 °C), sellado IP65, carcasa de acero inoxidable y cable de PVC con trenza exterior de acero inoxidable.

Properties

FeatureSpecification
Measure and signal
Measurement ranges±1, ±2, ±5, ±10, ±20 and ±50 g
Sensitivity0,6-20 mV/g (según el rango); datos de calibración suministrados con el sensor
Frequency responseDepending on dynamic range (±5%): ±1g, DC at 250Hz; ±2 g, DC at 250 Hz; ±5g, DC at 300Hz; ±10 g, DC at 500 Hz; ±20 g, DC at 700 Hz; ±50g, DC at 1kHz
Resonance frequency±1g, 700Hz; ±2g, 700Hz; ±5g, 800Hz; ±10g, 850Hz; ±20g, 1200Hz; ±50g, 1800Hz
Output impedance3000 Ω
Acceleration limitsx20 in any direction
Electrical noise10 µg
IsolationIsolated from the base
Food and environment
Feeding5 V DC
Operating temperature-20 a +90 °C
Storage temperature-40 to 125 °C
SealedIP65
Housing materialStainless steel
Mechanics and connection
WirePVC with stainless steel outer braid
Wire connectionRojo: alimentación (+); azul: alimentación (-); amarillo: salida (+); verde: salida (-); pantalla (no conectada) a la carcasa
MountingMTN/7100: cuatro puntos, pequeño (requiere 4 tornillos M3); MTN/7110: cuatro puntos, grande; MTN/7120: un punto ¼" UNF; MTN/7120F: un punto 10-32 UNF; MTN/7120Q: un punto Quickfit
Dimensions (according to plan)MTN/7100: 25 x Ø21,0 x 25; MTN/7110: Ø33,0 x 28 x 34; MTN/7120: Ø25,0 x 33
Weight40 g (nominal)
ReferenceConfiguration
MTN/7100 MTN7100Mounting: four points, small · Requires 4 M3 screws MTN/7100 Technical Data Sheet (PDF)
MTN/7110 MTN7110Mounting: four points, large Technical data sheet MTN/7110 (PDF)
MTN/7120 MTN7120Mounting: one ¼" UNF dot Technical data sheet MTN/7120 (PDF)
MTN/7120F MTN7120FMounting: 10-32 UNF MTN/7120F Technical Data Sheet (PDF)
MTN/7120Q MTN7120QAssembly: One Quickfit point Technical data sheet MTN/7120Q (PDF)
Low-frequency accelerometer with response from DC Monitran MTN/7100
Dimensiones y colores de los hilos del acelerómetro Monitran MTN/7100

Other products

DPF Sensors logo
MP633 PRESSURE
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø10 h8 | Up to 16 bits per revolution | SSI or SSI + preset, RS422/RS485 | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | LSB step 800 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo flange | Ø6 h7 stainless steel shaft | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V power supply | IP64 shaft, IP66 sealed | 100 kHz (300 kHz optional)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current or ratiometric output | 41.5 x 58mm max. | Resolution 12 bits | Shaft Ø 6 mm | 5 VDC or 12/24 VDC | IP67/IP69K | 1 or 2 channels
NESA Environmental Meters
Pt100 4 wires | -40 ÷ +60°C | Pt100 1/3DIN | ±0.1°C @ 0°C | IP67 and IP68 | 10÷30Vdc | <50g
Monitran-Logo
4-20 mA proportional to RMS speed | Two-wire for PLC, DCS and controllers | 12-32 V DC | 2 Hz to 1 kHz ±10% | Faraday cage electronics | Stainless steel | IP67 (IP68 on 2285W, IP65 on 2285STC)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
SPI, TTL level, binary code | Ø 28 mm | 16-bit resolution | Ø 6 mm spindle or push-in coupling | 5 VDC (4.5 … 5.5 VDC) | IP54 / IP65 / IP67 | 14 or 16 turns (up to 5760°)
Non-intrusive ultrasonic transit time meter for pipes from 15 to 6000 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
CANopen (C2) or fiber optic (CF) | Hollow shaft Ø10 H7, housing Ø90 | Internal star coupling | 16 bit; 30 bit in 16384 turns | 10–30 V DC | IP65 shaft (IP66 sealed)
Shopping Basket