RFC-4800 CANopen Non-Contact Angle Sensor

Budget-friendly price Request a quote
CANopen | Ø 48 mm | 14-bit resolution | Shaftless: magnetic placeholder | 12/24 VDC (8 … 34 VDC) | IP67 / IP68 / IP69 | 1 or 2 channels

Novotechnik RFC-4800 CANopen Non-Contact Angle Sensor. 360° non-contact Hall angle sensor in two mechanically decoupled parts.

Non-contact Hall angle sensor, in two parts: sensor and magnetic position marker, without shaft or bearing. 360° measuring range. IP67, IP68, and IP69 protection. Measures through non-ferromagnetic material. Encapsulated electronics.

Key points

  • Contactless Hall technology, 360° electrical range
  • Two-piece design, mechanically decoupled
  • IP67, IP68, IP69 protection
  • 14-bit resolution
  • Unlimited mechanical life
  • Radiated HF fields 100 V/m (ISO 11452-2); exceeds E1 requirements

Technical Frequently Asked Questions

What can be connected to the RFC-4800 CANopen contactless angle sensor?

It can be connected to Novotechnik M12 connectors and cables and Novotechnik rotary sensor positioners (magnets).

How do I order the RFC-4800 CANopen contactless angle sensor?

The order code has 7 fields: mechanical version, digital interface, resolution, interface, parameters, speed, and connection. For example, RFC-4852-214-614-432 is the version with round hole mounting, digital interface, 14 bits, CANopen with 1 position and 1 speed (one channel), 250 kBaud, and a 1 m shielded 8-pole cable (CAN input/output). All the options for each field are available in the order code configurator on this page.

Under what conditions does the RFC-4800 CANopen contactless angle sensor operate?

Operating temperature: -40 … +105 °C, -25 … +85 °C (M12 connector). Protection: IP67 / IP68 / IP69, IP67 (M12 connector).

Properties

FeatureSpecification
Measurement and interface
Measured variablesPosition and speed
Measuring range360°
Speed measurement range0 … 1600 rpm
Number of channels1 / 2
ProtocolCANopen according to CiA DS-301 V4.2.0, DS-406 V3.2 device profile, Encoder Class C2, LSS services according to CiA DS-305 V1.1.2
Programmable parametersPosition, speed, cams, working areas, direction of rotation, scale, offset, node ID, transmission speed
DiagnosisActivated (in case of error, the output signal falls outside the plausible signal range)
Node ID1 … 127 (default 127)
Transmission speed50 … 1000 kBaud
Update frequency (output)1 kHz
Position resolution (in 360°)14 bits
Speed resolution360°/2^14 ≈ 0.022°/ms
Independent linearity≤ ±0.5 % FS
Repeatability≤ ±0.1°
Hysteresis≤ ±0.1°
Temperature error±0.2 % FS
Feeding and protection
Supply voltage Ub12/24 VDC (8 … 34 VDC)
Current consumption when connected≤ 50 mA
Power consumed without load< 0.4 W
Overvoltage protection45 VDC (permanent)
Reverse polarity protectionYes (feed lines)
Short circuit protectionYes (all outputs to GND and supply voltage up to 40 VDC)
Insulation resistance (500 VDC)≥ 10 MΩ
Internal bus termination120 Ω (optional)
Electromagnetic compatibility
ISO 10605 ESD (handling/component)8 kV
ISO 11452-2 Radiated HF fields100 V/m
ISO 11452-5 Radiated HF fields, stripline200 V/m
CISPR 25 Radiated emissionLevel 3
ISO 7637-2 Transient emissionsLevel 3
ISO 7637-2 Impulses in the feed lines (1, 2a, 2b, 3a, 3b, 4, 5)Level 4
ISO 7637-3 Impulses on output linesLevel 4
E1 RequirementsExceeds E1 requirements
Environmental conditions
Vibration IEC 60068-2-620 g, 5 … 2000 Hz, Amax = 0.75 mm
IEC 60068-2-27 Shock50 g, 6 ms
DIN EN 60529 protectionIP67 / IP68 / IP69, IP67 (M12 connector)
Working temperature-40 … +105 °C, -25 … +85 °C (M12 connector)
LifeMechanically unlimited
MTTF (IEC 60050)843 years (one channel) or 819 years (two channels, per channel)
Mechanical data
HousingTemperature-resistant plastic
Fixation2 M4x20 socket head cap screws (included in the supply)
Mechanical tourContinuous
Maximum working speedMechanically unlimited
Weight (without connection)approx. 50 g
Electrical connectionCable 2x 2x 0.34 mm² (AWG 22), TPE, shielded / cable 4x 0.5 mm² (AWG 20), TPE, shielded / cable 4x 2x 0.25 mm² (AWG 24), TPE, shielded / M12x1 connector, A-code, with cable L = 0.15 m
OptionMeaning
Example: RFC-4852-214-614-432 = mounting with round hole, digital interface, 14 bits, CANopen with 1 position and 1 speed (one channel), 250 kBaud and 1 m shielded 8-pole cable (CAN input/output).
1 · Mechanical version
4851Mounting with elongated hole
4852Mounting with round hole
2-4 · interface, resolution, bus interface
2Interface: Digital interface
14Resolution: 14 bits
6Bus interface: CANopen
5 · Interface parameters
11 channel: 1x position, 1x speed
51 channel: 1x position, 1x speed, with 120 Ω termination
22 channels: 2x position, 2x speed
62 channels: 2x position, 2x speed, with 120 Ω termination
6. Transmission speed
11000 kBaud
2800 kBaud
3500 kBaud
4250 kBaud
5125 kBaud
750 kBaud
7 · Electrical connection
2020.5 mm² cable, 4 poles, shielded, L = 1 m
2360.34 mm² cable, 4 poles, shielded, L = 3 m
2400.34 mm² cable, 4 poles, shielded, L = 5 m
4320.25 mm² cable, 8 poles, shielded, L = 1 m (CAN input/output) (*)
5115-pin M12x1 connector with shielded cable, L = 0.15 m
The code is formed using one option from each field, in the order shown in the example. Contact us and we will confirm the exact reference.
Novotechnik RFC-4800 CANopen Non-Contact Angle Sensor
Dimensional plane Contactless angle sensor RFC-4800 CANopen Novotechnik

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange, Ø11 h7 shaft | Up to 65536 steps × 16384 revolutions | SSI or SSI with preset, Gray/binary | 10–30 V power supply | IP64 shaft (IP66 sealed) | 800 kHz step frequency | ±½ LSB accuracy (<13 bit)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, Gray or BCD output | Stroke up to 5000 mm | Resolution 0.1 or 1 mm | 5 V ±5 %, 8–24 V or 18–28 V | IP64 | Accuracy ±0.2 mm | Max. frequency 25 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø41 mm | Shaft Ø6.35 h7, centered Ø34.92 h7 | 1–2540 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange, Ø11 h7 shaft | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP64 shaft (IP66 sealed) | Optional shaft Ø8, 9.52, 10, 12 or 12.5
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | Stroke 50 … 4250 mm | Voltage or current output | Linearity ≤ ±0.02 % FS | 16 bits | IP67 / IP68
ATESTEO LOGO, manufacturer of torque sensors
Dual Inductive Metrology | Limit 10,000 N·m | 12,000 RPM | PCD Flange 196.0 mm | Accuracy 0.05% | Inertia 0.0463 kg·m²
NESA Environmental Meters
4÷20mA / ModBus RS485 | NO2 | 0÷20 / 0÷200 ppm | -30 ÷ 50°C | 11…30 Vdc | IP54 | 230g
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–8 mm | Housing Ø38 mm | 1 to 2500 impedances/revolution | Push-pull; line driver (5 V only) | Power supply 5 V ±5 %, 5–12 V, 12–24 V | IP54 shaft side | Elastic coupling
NESA Environmental Meters
4÷20mA / ModBus RS485 | O3 | 0÷5 ppm | -40 ÷ 50°C | 11…30 Vdc | IP65 / IP54 | 200g
DPF Sensors logo
TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g
Shopping Basket