SSU sensor support arm
Budget-friendly price Request a quote
Support arm | 700/750 mm | Jaws Ø 40 mm | Post Ø max. 60 mm | Anodized aluminum | Stainless steel screws.
- Manufacturer: Nesa
- Category: NESA Accessories, Sensor accessories, SENSORS
The NESA SSU is a sensor support arm, 700/750 mm in length, with clamping jaws of Ø 40 mm for NESA sensors and fixing to poles of max. Ø 60 mm.
It is made of 10mm thick anodized aluminum and has stainless steel screws.
Key points
- Support arm 700/750 mm in length
- Sensor clamping jaws Ø 40 mm, for NESA sensors
- Fixing to posts of max. Ø 60 mm
- 10mm thick anodized aluminum
- Stainless steel screws
Technical Frequently Asked Questions
What is the SSU?
A support arm for NESA sensors, 700/750 mm in length.
What diameters does it support?
The sensor clamping jaws are Ø 40 mm and the mounting supports posts with a maximum diameter of 60 mm.
What material is it made of?
Made of 10mm thick anodized aluminum, with stainless steel screws.
Properties
| Feature | Specification |
|---|---|
| Support arm | |
| Product type | Support arm for sensors |
| Length | 700/750 mm |
| Material | Anodized aluminum |
| Thickness | 10 mm |
| Subjection | |
| Sensor clamping jaws | Ø 40 mm |
| Post mounting | Max. diameter 60 mm |
| Screws | Stainless steel |
Available references
| Reference | Description |
|---|---|
| SSU | Support arm, length 700/750 mm, with clamping jaws of Ø 40 mm for the sensors and fixing to posts of max. Ø 60 mm. Stainless steel screws |
| Reference | Configuration |
|---|---|
| SSUSSU | Description: Support arm, length 700/750 mm, with Ø 40 mm clamping jaws for sensors and fixing to posts of max. Ø 60 mm. Stainless steel screws |
Related documentation, cases, and guides
Other products
Onboard scale | Bluetooth to Android and iOS app | Wireless to cabin | 3 sensors | Manufactured in Bellvei (Tarragona)
µV, 0÷2Vdc, 4÷20mA, RS485/Modbus | ± 2000 W/m² | 0.2 ÷ 110 µm | Thermopile | 510x60mm | <500g
Combined glass/gel reference pH electrode, 9.5mm diameter Epoxy body and 1.5m cable with BNC connector.
-40 … +105 °C (Z-TH1) | Pressure ≤ 40 bar (Z-TH1-P32) | Stem Ø 10 mm and profile
63 mm square flange, Ø9.52 h7 shaft | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP65 shaft (IP66 sealed) | Optional shaft Ø6, 8, 10, 11 or 12
Light Telemetry (eS Series) | Flexible Range 50 – 100 N·m | High Strength Steel | PCD Flange 101.5 mm | Inertia 0.00350 kg·m²
Housing Ø80, servo-type flange | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Linear position sensor by wire with incremental encoder, 1,000 mm travel and resolution up to 0.04 mm/pulse, with push-pull output or line driver.