Monitran MTN/EP080 eddy current probe

Budget-friendly price Request a quote
Industrial eddy current probe | Linear range 0 – 2 mm | Sensitivity 8 mV/µm nominal | DC to 10 kHz | M8 thread, Ø6 mm | -30 °C to 180 °C (probe) | Power supply -24VDC @ 30mA

The Monitran MTN/EP080 is an industrial eddy current probe with a linear range of 0–2 mm, nominal sensitivity of 8 mV/µm, nominal linearity of 1%, and a frequency response from DC to 10 kHz. It is powered by -24VDC @ 30mA and has an output impedance of less than 50 Ω. The datasheet cites applications such as pump monitors, turbines, DC gap monitoring in machine tools, and measuring instruments.

PEEK tip and 36 mm long stainless steel housing with M8 thread and Ø6 mm diameter (as per drawing). Operating temperature of -30 °C to 180 °C for the probe and -20 °C to 80 °C for the driver, with temperature sensitivity of less than 5% at 150 °C (probe) and 80 °C (driver). RG179 cable with PTFE insulation; maximum cable length of 9 meters. Calibrated on AISI 4140 stainless steel. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Linear range of 0 – 2 mm; nominal sensitivity of 8 mV/µm; nominal linearity of 1%
  • DC response at 10 kHz; output impedance <50 Ω; power supply -24VDC @ 30mA
  • PEEK tip and stainless steel housing with M8 thread; RG179 cable with PTFE insulation up to 9 meters

Technical Frequently Asked Questions

What is the range and sensitivity of the Monitran MTN/EP080 probe?

Linear range of 0 – 2 mm and nominal sensitivity of 8 mV/µm, with nominal linearity of 1% and frequency response from DC to 10 kHz.

How does it power itself and what temperature can it withstand?

It is powered by -24VDC @ 30mA. The operating temperature is -30°C to 180°C in the probe and -20°C to 80°C in the driver; the temperature sensitivity is less than 5% at 150°C (probe) and 80°C (driver).

What cable length does it support and what material is it calibrated on?

The maximum cable length is 9 meters, with MTN/EX00 extension cable (length to be specified). Calibration is on AISI 4140 steel.

Properties

FeatureSpecification
Measure and signal
Measurement ranges0 – 2 mm
Sensitivity8 mV/µm nominal
Linearity1% nominal
Frequency rangeCC at 10 kHz
Output impedance<50 Ω
Food and environment
Feeding-24VDC @ 30mA
Working temperatureProbe: -30°C to 180°C / driver: -20°C to 80°C
Thermal sensitivityProbe: less than 5% at 150 °C; driver: less than 5% at 80 °C
Calibration materialAISI 4140 steel
Mechanics and connection
Tip materialPEEK
Housing materialStainless steel
ThreadM8
Tip diameter (according to drawing)Ø6 mm
Length (according to plan)36 mm
WireRG179 with PTFE insulation
Maximum cable length9 meters
Extension cableMTN/EX00? (length to be specified)
ReferenceConfiguration
MTN/EP080 MTNEP080Industrial eddy current probe, linear range 0 – 2 mm, 8 mV/µm nominal, M8 thread Technical data sheet MTN/EP080 (PDF)
Monitran MTN/EP080 Eddy Current Probe with M8 Thread
Diagram of the Monitran MTN/EP080 probe (36 mm, Ø6 mm, M8 thread) and driver

Other products

DPF Sensors logo
Monoaxial or biaxial, Range ±10° to ±90º, Monoaxial to ±180º Outputs 4…20- 0-5VDC, RS-232, Modbus, Canbus, Accuracy ±0.1º and repeatability of ±0.05
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø40 mm | Solid shaft Ø6 mm (Ø8 optional) | 10–2500 impedances/revolution | NPN, push-pull, line driver | 5 V ±5 % or 12–24 V | IP52 shaft (IP65 output with cable) | Max. frequency 180 kHz
DPF Sensors logo
TSC serial inclinometer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
PROFIBUS-DP Class 2, 12 Mbaud | Housing Ø58 mm, servo mounting | Shaft Ø10 h8 (Ø6 optional) | 16 bit; 30 bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
LVDT Manufacturer Logo Schreiber Messtechnik
Amplified LVDT | Range 80 to 360 mm | Stainless Steel Housing Ø 25 mm | IP66 | Outputs 4-20mA / ±10V | Clamp Mounting
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Section 18×46 mm | Stroke 70–1240 mm | Resolution 5, 1 and 0.5 µm (x4) | Line driver output (VD) | Power supply 5 V ±5 % | IP53 (IP64 with compressed air) | Accuracy ±10 µm (opt. ±5 µm)
NESA Environmental Meters
Thermopile (output in mV) | -2000 ÷ +2000 W/m² | <±5% on standard terrain | 50 µV/(W/m²) | ISO8302 · CE | <200 g
DPF Sensors logo
Pressure transducer for industrial applications
ATESTEO LOGO, manufacturer of torque sensors
Dual Inductive Metrology | Limit 10,000 N·m | 12,000 RPM | PCD Flange 196.0 mm | Accuracy 0.05% | Inertia 0.0463 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-hole shaft Ø20 H6 | Ø90 mm, tangential coupling | 9000–900000 imp/rev | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 shaft (IP65 wired output) | ±5″; 2200 kHz with interpolation
Shopping Basket