Portable power supply for IEPE Monitran MTN/APSU01 accelerometers

Budget-friendly price Request a quote
IEPE Accelerometer Power Supply | 1, 2, 3 or 4 channels | 2 x PP3 batteries, 10 h | Optional DC input | Cable gland or BNC connection | Portable enclosure 140 x 90 x 45 mm

The Monitran MTN/APSU01 is a portable power supply that provides constant current to constant current accelerometers. It operates on battery power (2 × PP3, 10 hours of autonomy, low battery LED indicator) or with an optional DC input.

Housed in a portable enclosure measuring 140 × 90 × 45 mm, it is available with 1, 2, 3, or 4 channels and connections via cable glands or BNC connectors. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Input for constant current accelerometer; output: acceleration (mV/g)
  • 1, 2, 3 or 4 channels and connection by cable gland or BNC, to be specified in the order
  • 2 x PP3 battery with 10 hours of autonomy and low battery LED indicator, or optional DC input

Technical Frequently Asked Questions

How many channels can the Monitran MTN/APSU01 source have?

1, 2, 3 or 4, to be specified in the order.

What power options does the MTN/APSU01 offer?

2 × PP3 battery (10 hours of autonomy, low battery LED indicator) or optional DC input.

What sensors does it use and what connections does it have?

With constant current accelerometers; the output is acceleration (mV/g). Connections are via cable glands or BNC, to be specified in the order.

Properties

FeatureSpecification
Measure and signal
EntranceConstant current accelerometer
ExitAcceleration (mV/g)
Channels1, 2, 3 or 4 (to be specified in the order)
Food and environment
Battery powered2 x PP3, 10h battery life, low battery LED indicator
External power supplyOptional DC input
Mechanics and connection
ConnectionsCable gland or BNC (to be specified in the order)
HousingPortable box, 140 mm × 90 mm wide × 45 mm deep
ReferenceConfiguration
MTN/APSU01 MTNAPSU01Portable power supply for constant current accelerometers; channels (1, 2, 3 or 4) and connections (cable gland or BNC) to be specified in the order MTN/APSU01 technical sheet (PDF)
Monitran MTN/APSU01 portable power supply with BNC inputs
Front panel of the Monitran MTN/APSU01 power supply (switch, LED, BNC output and input); the sheet does not include a dimension drawing

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Output 0 … 10 V, ±10 V, 0 … 20 mA or 4 … 20 mA | Input > 10 MΩ | 18 … 30 VDC | Housing 64 x 58 mm, IP 66 | -25 … +70 °C
Monitran-Logo
100 mV/g ±10% nominal at 80 Hz | 2 Hz to 10 kHz ±5% | ±80 g | Constant current 0.5 to 8 mA | Stainless steel, IP67 / IP68 | With or without temperature output 10 mV/°C
Monitran-Logo
Isolated velocity output of 4 mV/mm/s | Constant current of 0.5 to 8 mA | 5 Hz to 5 kHz ±5% | Dynamic range ±80 g | -25 to 140 °C | Stainless steel | IP67
DPF Sensors logo
1 load cell input converter module (bridge), allows up to 4 cells to be connected to the same input, and mediates the signal. RS485-Modbus output. 19 to 40 V DC power supply.
DPF Sensors logo
DIGITAL MAGNETIC ADAPTER, adapts the pulse signal from a magnetic pickup to opto or TTL, (sensitivity 1.. 110VAC) (Previously Adapta-alterna)
Recorder 4-20 Ma
Monitran-Logo
Para las versiones con conector del acelerómetro 1186 | Toma 62GB de 3 pines a extremos libres | Cable de PVC de tres conductores | 5 m
DPF Sensors logo
Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in data logger + display.
Monitran-Logo
4-20 mA ∝ rms speed | 0-10 to 0-100 mm/s | 2Hz to 1kHz ±10% | Ex ia IIC T6 Ga · Ex ia IIIC T85 °C Da | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32V DC | Stainless steel, IP67
Monitran-Logo
Response from DC (0 Hz) | Sensitivity 0.6-20 mV/g depending on the range | Ranges from ±1 to ±50 g | Power supply 5 V DC | -20 to +90 °C | Stainless steel | IP65
Shopping Basket