Monitran MTN/1310 Triaxial Load Accelerometer

Budget-friendly price Request a quote
Triaxial (three axes) | Load sensitivity 5 pC/g ±10% | Three in-line load amplifiers: 10, 100 or 500 mV/g | 1 Hz to 30 kHz | ±2000 g | -55 to 140 °C | IP64

The Monitran MTN/1310 is a triaxial accelerometer ideal for any application requiring vibration measurement along the three spatial axes: aerospace, automotive, and research and development. It features a load sensitivity of 5 pC/g ±10%, a frequency response of 1 Hz to 30 kHz, and an acceleration range of ±2000 g.

It is supplied with an integral 4-conductor cable with stainless steel over-braiding and three charge amplifiers encapsulated in a single die-cast housing, in-line with the sensor, with outputs of 10 mV/g, 100 mV/g, and 500 mV/g. The 35 g stainless steel housing features 4-point mounting with supplied M3x16 screws and IP64 sealing. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Triaxial charge sensor: 5 pC/g ±10%, 1 Hz to 30 kHz, ±2000 g and capacitance of 300 pF (nominal)
  • Three in-line load amplifiers in a single die-cast enclosure, with outputs of 10 mV/g, 100 mV/g, and 500 mV/g.
  • Operating temperature from -55 to 140 °C, 35g stainless steel housing, IP64 sealed

Technical Frequently Asked Questions

What type of signal does the Monitran MTN/1310 deliver?

The triaxial sensor is a charge sensor (5 pC/g ±10%) and is supplied with three in-line charge amplifiers, encapsulated in a single die-cast case, with outputs of 10 mV/g, 100 mV/g and 500 mV/g.

What are its measurement ranges, frequency, and temperature capabilities?

Acceleration range of ±2000 g, frequency response of 1 Hz to 30 kHz and operating temperature of -55 to 140 °C, with capacitance of 300 pF (nominal).

How is the load amplifier circuit powered?

The system drawing on the sheet shows a constant current source with a +18 to +30 V input and a constant current diode of 0.5 to 8.0 mA; the AC output is taken through a 1 µF capacitor.

Properties

FeatureSpecification
Measure and signal
Load sensitivity5 pC/g ±10%
Load amplifier output10 mV/g; 100 mV/g; 500 mV/g
Acceleration range±2000 g
Frequency response1 Hz to 30 kHz
Capacitance300 pF (nominal)
Output circuit
Constant current source+18 to +30 V; constant current diode from 0.5 to 8.0 mA (according to the system diagram)
AC OutputOutput of the charge-coupled amplifier with 1 µF and 200 k
Environment and mechanics
Operating temperature-55 to 140 °C
SealedIP64
Housing materialStainless steel
Mounting4 points, M3x16 Allen screws (supplied)
WireIntegral ETFE with stainless steel overbraid
Standard cable length5 m to the in-line amplifier; then, 1 m of 4-conductor shielded cable with overtwisting
Dimensions (according to plan)Base 25.4 x 25.4mm; height 26.0 mm
Weight35 g (nominal)
ReferenceConfiguration
MTN/1310 MTN1310Triaxial accelerometer with 5 pC/g charge sensor and three in-line charge amplifiers (10 mV/g, 100 mV/g, and 500 mV/g output) Technical data sheet MTN/1310 (PDF)
Triaxial accelerometer in load mode Monitran MTN/1310
Dimensional drawing of the Monitran MTN/1310 triaxial accelerometer

Other products

Monitran-Logo
Response from DC (0 Hz) | Dynamic ranges ±1 to ±50 g | 50 or 100 mV/g | Power supply 12-24 V DC | Stainless steel, IP65 | −20 to +90 °C
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 1.35 mm, 4 m/s | Race 40, 50 or 60 m | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder and mechanics
Monitran-Logo
4-20 mA ∝ rms acceleration | 0-1 to 0-20g | 2Hz to 1kHz ±10% | Ex ia I Ma | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32V DC | Stainless steel, IP67 | Group I (mining)
DPF Sensors logo
ATEX pressure transducer
NCTE torque sensors.
Digital/Analog Meter | Variable Range | 0-10V/4-20mA Input | USB + Datasheet
NESA Environmental Meters
O3 and VOC | 0÷0.15 / 0÷0.5 / 0÷10 ppm (O3) | 0÷25 / 0÷500 ppm (VOC) | LCD 3.5 figures | 0÷5V DC or RS485 / ModBus | 12V DC, 800mA | 130x94x57mm
Wall humidity and temperature sensor
DPF Sensors logo
Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CAN SAE J1939 | 41.5 x 58 mm max. | 14-bit resolution | 6 mm shaft diameter | 12/24 VDC (8 … 34 VDC) | IP67 / IP69K | 1 or 2 channels
ATESTEO LOGO, manufacturer of torque sensors
Dual Inductive Metrology | Limit 500 N·m | 21,000 RPM | PCD Flange 84.0 mm | Accuracy 0.04% | Inertia 0.0017 kg·m²
Shopping Basket