IND32-C
COUNTER indicator, 32 x 74 format. Input for encoders, inductive detectors, contacts,….
- Manufacturer: DPF Sensors
- Category: Digital indicators, INSTRUMENTATION, Pulses
Counter for bidirectional encoders, supports inductive sensors and potential-free contacts.
Single or double meter with independent inputs
Allows simultaneous display of the count and the alarm value.
It allows you to have a setpoint via an external potentiometer, 2 alarm relays and the multiplication and division factor can be programmed.
You can program the indication of pieces per hour.
Properties
Other products
TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g
Passive 2-way 4/20mA galvanic isolator. 4 channels (ISO2 QUATTRO-420) in a single housing. Self-powered 24VDC.
Industrial linear resistive sensor • 10 to 200 mm • multiple versions • infinite resolution
Generator – simulator of PROCESS electrical signals.
Digital simulator of the position in % (0.. 100%) of the potentiometric value (3 wires). Light and autonomous Digital setpoint by means of preselectors
Novotechnik MUP-110/160 potentiometer signal conditioner. Converts position sensors to 0–10 V, 0–20 mA or 4–20 mA for PLC.
Digital signal adapter to relay output
Load to Voltage Converter | Passive Input (No Amp) | Analog mV Output (Amp) | Gain 1pC = 2mV | Impedance >10^12 Ohms | Frequency 1Hz-20kHz | Power Supply 18-30V DC | Microdot/SMC to BNC Connection | Shielded Housing | In-Line Mounting
3-way isolator: ± 0/10V input, isolated excitation (24V/20mA), isolated output ± 0/10V, isolated 24VDC (20.. 30V) power supply * 2 channels *