I/58HJ “Heavy-Duty” Compact Incremental Encoder

I/58HJ – Compact “Heavy-Duty” Incremental Encoder, Shaft Ø 10×18 mm, Body: Ø 58 mm, Pulse range: 1 to 1,024

The incremental encoder ELCIS I/58HJ It is an industrial model with a focus economic and construction heavy-duty, designed to offer excellent value for money without sacrificing mechanical durability or electrical reliability. Its housing is made of composite material, with lid Valox 420, and is equipped with a solid stainless steel shaft Ø 10X18 mm.

Despite its economic nature, the I/58HJ offers technical characteristics typical of higher ranges, such as an output frequency of up to 60 kHz, feeding of 5 to 30 V DC, and multiple output electronic options: push-pull, line driver, NPN, and open collector. Supports resolutions of 1 to 1,024 pulses per revolution (ppr) and supports continuous speeds of up to 6,000 rpm.

This encoder is optimized for industrial applications where price is a key factor, without compromising structural quality or performance in environments with vibration (12 G) and shock (50 G). Its internal LED has an estimated lifespan of over 100,000 hours, and its precision bearings reach 1.5 × 10⁹ revolutions of mechanical life.

Properties

ParameterSpecification
ModelELCIS I/58HJ
GuyEconomical compact incremental encoder, solid shaft
Casing diameterØ 58×52 mm
Shaft diameterØ 10×18 mm (stainless steel)
Resolution1 to 1.024 ppr
Feeding5 to 30 V DC
Maximum output frequency60 kHz
Signal typePush-pull / Line driver / NPN / Open collector
Body materialPlastic compound
CoverValox 420
BearingsHigh precision, service life: 1.5 × 10⁹ revolutions
Maximum speed6,000 rpm (intermittent +30%)
Starting torque18 g·cm
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2,000 Hz)
Operating temperature0 °C to +60 °C
Storage temperature–30 °C to +85 °C
ProtectionIP54 standard / IP65 optional
Weight145 g
Light sourceLED, lifespan ≥100,000 hours
I/58HJ Incremental Encoder Heavy Loads ELCIS BRAND

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Power supply 5-30V DC | 8mm Stainless Steel Shaft | Weight 120g | Impact Resistance 50G | Bearing Life 1.5×10^9 revolutions | Maximum Frequency 60kHz | NPN/Push-Pull Outputs | Operating Temperature 0-60°C | IP65 Protection (Optional) | Current Consumption 120mA (Standard)
Monitran-Logo
Linear Range 0-12mm | Sensitivity 1.0mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M30 x 1.5 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Power supply 5-30V | Shaft diameter 15-20 mm | Weight 340 g | IP65 | Output 6000 RPM Max | Starting torque 90 gcm | Bearing life 1.5 x 10^9 rev | Impact resistance 50 G | Operating temperature 0-70 °C | Maximum frequency 100 kHz
B&C ELECTRONICS Logo 2026 WATER QUALITY
Combined glass/reference pH electrode with Pt100. Double PTFE junction. PVDF body.
Dimetix_AG-1
Dynamic Industrial Communication Extension Module for DIN Rail Range: Effective range of the data bus extended up to 1200 meters (1.2 Km)
Monitran-Logo
Triaxial Measurement (X, Y, Z) | High Temperature 250°C | Sensitivity 5pC/g | Frequency 1Hz-30kHz | Range ±2000g | Load Output (pC) | No Electronics in Head | Stainless Steel | 4-Point M3 Mounting | Integral 4-Core Cable
Radar level sensor, range up to 10 meters.
Monitran-Logo
Linear Range 0-5mm | Sensitivity 4mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M16 x 1 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable
Temperature and humidity transmitter. For ambient and duct use. Output signal: 4-20 mA, 0-10 VDC, and RS485.
Shopping Basket