I/55 Standard Incremental Encoder

I/55 – Standard Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 55×56 mm, Pulse range: 1 to 2,540

The incremental encoder ELCIS I/55 is designed for industrial environments where a reliable, medium-sized, high-performance solution is required. With a body of Ø 55 mm and solid axle of Ø 6 mmThis model provides mechanical stability, signal accuracy and long service life, even under demanding working conditions.

The I/55 supports resolutions from 1 to 2,540 pulses per revolution (ppr), with feeding between 5 and 28 V DC, allowing its integration into a wide range of control systems. It offers multiple electrical output types such as push-pull, line driver, NPN, PNP, or open collector. Thanks to its optical system with long-life LEDs and precision bearings, it is capable of generating clean signals up to 100 kHz, supporting speeds up to 6,000 rpm.

This encoder is prepared for hostile industrial environments, with vibration protection up to 12 G, impacts of 50 G, and temperatures from 0°C to +70°C. Its mid-size format makes it ideal for applications where increased performance is required without excessively increasing the device's volume.

Properties

ParameterSpecification
ModelELCIS I/55
GuyIncremental encoder, solid shaft, cylindrical housing
Casing diameterØ 55 mm
Body length56 mm
Shaft diameterØ 6 mm × 10 mm
Resolution1 to 2,540 ppr
Feeding5 to 28 V DC
Maximum output frequencyUp to 100 kHz
Signal typePush-pull / Line driver / NPN / PNP / Open collector
Body materialAnodized aluminum
Shaft materialStainless steel
BearingsHigh precision, service life: 1.5 × 10⁹ revolutions
Maximum speedUp to 6,000 rpm
Starting torqueFrom 8 to 30 g·cm
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2,000 Hz)
Operating temperature0 °C to +70 °C
Storage temperature–30 °C to +85 °C
ProtectionIP64, IP66 or IP53 (depending on the bearing version)
Weight≈ 150–160 g
Light sourceLED, lifespan ≥100,000 hours
I/55 Normal incremental encoder ELCIS brand

Other products

Differential pressure transducer for air
Wall-mounted temperature sensors for indoor or outdoor use, with Pt100, 4-20 mA, 0-10 Vdc signal, with or without display
Schreiber Messtechnik logo
Amplified LVDT Measuring ranges: 20, 40, 70, 80, 100, 150, 170, 240, 360 mm, diameter 25mm
Conductive plastic linear potentiometer.
Industrial LOW pressure transducer
Dimetix_AG-1
Reflective film 600 x 1200 mm For Dimetix laser sensor
CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication