FMC150 GPS TELTONIKA

The FMC150 is an advanced 4G LTE Cat 1 GPS tracker with integrated CAN processing, ideal for fleets, electric vehicles, trucks and machinery.

He FMC150 is an advanced 4G LTE Cat 1 GPS tracker With integrated CAN processing, it's ideal for fleets, electric vehicles, trucks, and machinery. You can read over 100 CAN parameters, including fuel level and actual fuel consumption, RPM, speed, odometer, engine temperature, and EV-specific data. It also features 4G Cat 1 connectivity with 2G backup, 33-channel GNSS, Bluetooth 4.0 LE, 170 mAh internal battery, multiple digital and analog inputs/outputs, pulse counters, two CAN interfaces, 1-Wire, advanced sleep modes, and support for remote configuration (FOTA, SMS, USB/Bluetooth).. Its housing measures 65 × 56.6 × 20.6 mm, weighs ~55 g, and has IP41 protection.

Properties

FeatureSpecification
Cellular connectivityLTE Cat 1 (10 Mbps DL / 5 Mbps UL), 2G GSM/GPRS fallbackwifi-stock.com+6teltonika-gps.com+6wiki.teltonika-gps.com+6
GNSSGPS/GLONASS/Galileo/BeiDou/QZSS/SBAS/DGPS/AGPS, 33 channels, –165 dBm, < 2.5 m CEP, hot < 1 s, cold < 35 s
Bluetooth4.0 + LE, supports BLE sensors, OBDII, barcode scanners
Inputs / Outputs (I/O)QJIB0: 3 digital (2 with counter), 2 analog, 1 negative, 2 digital outputs; QKIB0: 2 digital, 1 analog, 3 digital outputs
Additional interfaces2 CAN interfaces, 1‑Wire, USB 2.0 Micro‑USB, indicator LEDs (3), SIM Micro‑SIM/eSIM
Internal battery170 mAh Li‑Ion (3.7 V, 0.63 Wh)
Energy consumptionUltra Deep Sleep <6mA; Deep Sleep <8mA; Online Deep Sleep <11 mA; GPS Sleep <20mA; Rated <35mA; Peak <250 mA (12 V)
Internal memory128 MB flash
Dimensions / Weight65 × 56.6 × 20.6 mm; ~55 g
Voltage range10–30 V DC with overvoltage protection
Operating temperature–40°C to +85°C (without battery); battery charge 0°C to +45°C
ProtectionIP41 (dust and splash)
CAN/EV supportReading CAN data of >100 parameters in vehicles (including electrical and machinery)
Highlighted FeaturesGreen Driving, overspeed, jamming and crash detection, automatic/manual geofences, immobilizer, idling, towing, iButton, etc.
Sleep modesUltra Deep, Deep, Online Deep, GPS Sleep
Configuration / updateFOTA Web, Bluetooth/USB, SMS, GPRS; GNSS/NITZ/NTP synchronization
CertificationsCE, RED, UKCA, E‑Mark, RCM, RoHS, REACH, CITC, TDRA, SDPPI, SIRIM, Anatel
Teltonika FMC150 GPS
Teltonika FMC150 GPS

Other products

Nesa
Programmable Embedded Linux Datalogger
DPF Sensors
8-channel 0-4/20mA statically switching multiplexer
DPF Sensors
3-way galvanic isolator for 0-4/20mA and 0/10V thermocouples. In a narrow 6.2mm case.
DPF Sensors
3-way isolator: 0/10V input, isolated excitation (24V/20mA), isolated 0/10V output, isolated 24VDC (20.. 30V) power supply * 2 channels *
DPF Sensors
1 load cell input converter module (bridge), allows up to 4 cells to be connected to the same input, and mediates the signal. RS485-Modbus output. 19 to 40 V DC power supply.
DPF Sensors
AC/DC current ammeter relay (16A). Overload and underload, 2 relays
DPF Sensors
Thermocouple converter and Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 wires, programmable via PC
DPF Sensors
AC/DC to RS485 Modbus + 0/10V current transformer, with isolation, high precision, up to 300 amps.
DPF Sensors
7-channel digital signal adapter to relay output
DPF Sensors
Wirelessly configurable 4/20mA Thermocouple and RTD isolator (Passive)