PT100 PT1000 RTD Replicator with galvanic isolation PTi-1000
Budget-friendly price Request a quote
RTD Replicator for PT100 and PT1000 | 2, 3 and 4 wires | DIN rail | 10-30 V AC/DC
Replicador RTD PTi-1000 de ITAIA. Genera resistencias reales independientes en cada salida. Un único sensor alimenta a un PLC, un SCADA y un registrador, con aislamiento galvánico entre salidas.
Aplicable a sistemas de medición pulsada o multiplexada.
Características
- Error típico: 0,02 % (≈0,05 °C).
- Aislamiento galvánico entre entrada, salidas y alimentación.
- Sensores compatibles: PT100, PT500, PT1000, Ni100, KTxx y señales resistivas.
- Versiones con certificación ATEX / IECEx (Ex ia).
Versiones: DH, SH, XD y XS. Configuraciones de salida: resistencia, señales analógicas 4-20 mA / 0-10 V y opción de display OLED.
Resolución: 16 bits. Conexiones de 2, 3 y 4 hilos. Aplicación: distribución de una señal RTD.
Properties
| Function | Galvanically isolated true resistance RTD replicator/duplicator |
| Tickets | RTD / resistance |
| Compatible sensors | PT100, PT500, PT1000, Ni100, KTxx |
| Probe connection | 2, 3 and 4 threads |
| Cable compensation | Yes, in a 2-wire configuration |
| Resistance output range | 30 Ω … 9.5 kΩ |
| Number of exits | 2 or 4, depending on the version |
| Versions | DH / SH / XD / XS |
| Analog outputs | According to version: 0/4-20 mA and 0-10 V |
| Typical accuracy | 0,02 % |
| Resolution | 16 bits |
| Input-output delay | < 0.5 s |
| Pulsed/multiplexed measurement | Compatible with pulsed and multiplexed measurement systems |
| Galvanic isolation | Galvanic isolation at inlet, outlets and power supply |
| ATEX Certification | Intrinsically safe version available Ex ia |
| Feeding | 10 … 30 V AC/DC |
| Consumption | < 1.2 W (OLED) / 2.5 W peak |
| Working temperature | -30 … +50 °C |
| Degree of protection | IP20 |
| Mounting | DIN rail EN 60715 |
| Dimensions | 22 x 92 x 69 mm / 22 x 92 x 93 mm, depending on the version |
| Screen | OLED 64×48, depending on the version |
| Regulations | CE, EN61010-1, EN61000-3/2,-6/1.3, Ex ia option |
Other products
Bidirectional USB to RS232 converter
12-bit digital/analog converter.
Signal duplicator – 0/10V isolator (with excitation) input: 0/10V excitation (24V/20mA) isolated output: 2 x 0/10V power supply 24VDC (20.. 30V) isolated
Tachometer – universal programmable frequency meter with dual display.
Universal galvanic isolator from PWM to 0-4/20mA and 0/10V, PWM input (4.. 30V), isolated output 0/20mA or 4/20mA (Active), 0/10V and intermediate values, 24VDC power supply (22.. 30V)
True RMS AC/DC voltage and current isolator
Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20 mA active, Power supply: 24VDC (20.. 30V) isolated
1 load cell input converter module (bridge), allows up to 4 cells to be connected to the same input, and mediates the signal. RS485-Modbus output. 19 to 40 V DC power supply.
8 RTD (3H) multiplexer to 4/20mA output (Active/Passive)
Isolated pulse frequency converter (0.01 to 100 KHz)