SHP
Budget-friendly price Request a quote
Precision pressure transducer
- Manufacturer: DPF Sensors
- Category: Pressure, SENSORS
General purpose pressure sensor, where high precision is required.
Properties
 | 0…10 mbar to 0…2000 bar |
|---|---|
| -20…85°C medium temperature |
| 0.15 % accuracy |
| Output signal 4…20 mA, 0…10 Vdc |
| Absolute or relative pressure. |
| 1/4″ Gas thread. |
Related documentation, cases, and guides
Technical documentation
- Absolute vacuum measurement: types of vacuum gauges and principles
- Pressure unit conversion table: Atm, psi, bar and kPa
- Load cells and strain gauges: types and operation
- CO2, VOC and humidity sensors DPF Sensors: model catalog
- DPF Sensors humidity and temperature sensors: overview by model
- Humidity sensors: types, principles and applications
Other products
3-channel potentiometer-joystick (position) converter. 3 potentiometer inputs >1K5. 3 voltage outputs (0/10V or -5/+5V) or current (4/20mA). Power supply: 24VDC.
3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with passive loop excitation), isolated output: 0-4/20mA (Active) Isolated 24VDC (20.. 30V) power supply
Conductivity range from 0 to 20 mS/cm. Output 4/20mA
Frequency generator – simulator (pulses) Hz, KHz with PNP, NPN, namur, PUSH PULL, TTL, AC output, .. Frequency range 0.1Hz to 100 KHz.
Incremental output | Ø66 mm drive | 100 pulses/revolution with latching | NPN, PNP, push-pull, driver | 5–30 V power supply | IP64 shaft side (IP65 cable) | 1 m CV radial cable
Thread Ø 0.9 mm, 8 m/s | Stroke up to 2000 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP53 mechanical)
Square housing 120 mm | Ø22 h7 stainless steel shaft | Radial/axial load 30 kg | 1 to 2540 pulses/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft side, radial output
Housing Ø63.5 mm | B10 type flange (Ø115) | Ø11 h7 stainless steel shaft | 1 to 10000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed)
Generator – simulator of PROCESS electrical signals.
