RSC-2800 Analog Non-Contact Magnetic Angle Sensor

Budget-friendly price Request a quote
Voltage, current, or ratiometric output | Ø 28 mm | 12-bit resolution | Ø 6 mm shaft or push-in coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67 | Up to 360°

Novotechnik RSC-2800 Analog Magnetic Angle Sensor. Non-contact magnetic sensor, up to 360°.

Non-contact magnetic angle sensor: measures the orientation of the magnetic field, not its intensity like conventional Hall sensors. Measurement range up to 360°. Analog and digital outputs depending on the version. Plastic housing with elongated slots. Three shaft versions, one with a snap-on coupling.

Key points

  • Contactless magnetic technology
  • Measuring range up to 360°
  • With press-fit coupling or with marked shaft
  • IP54, IP65, IP67 protection
  • Hysteresis ≤ ±0.1°
  • 12-bit resolution; linearity < ±0.5%
  • Single and multi-channel versions
  • Mobile version: EMC with ISO and ISO 11452 pulses; European E1 approval

Technical Frequently Asked Questions

What can be connected to the RSC-2800 analog magnetic angle sensor?

It can be connected to Novotechnik M12 connectors and cables and Novotechnik rotary sensor couplings and accessories.

How do I order the RSC-2800 analog magnetic angle sensor?

The order code has 7 fields: mechanical version, channels, range, Ub, parameters, characteristic, and connection. For example, RSC-2832-636-211-202 is the version with a 6 mm diameter shaft with a flat surface, IP65 rating, one channel, 0° to 360° rotation, Ub = 5 VDC, 0.25 … 4.75 V ratiometric output, clockwise increments, and a 4-pole, 1 m shielded cable. All order references with their corresponding part numbers are listed in the reference table on this page.

Under what conditions does the RSC-2800 analog magnetic angle sensor operate?

Protection: IP54 / IP65 / IP67.

Properties

FeatureSpecification
Measurement data
Measuring range0 … 30° to 0 … 360° (10° steps)
Resolution12 bits
Independent linearity≤ ±0.5 % FS
Repeatability≤ ±0.1°
Hysteresis≤ ±0.1°
Update frequencytyp. 5 kHz
Common data
No-load current consumptiontyp. 15 mA (typ. 8 mA, on request)
Reverse polarity protectionYes (feed lines)
Short circuit protectionYes (versus GND and Ub; in current, from the output to GND and the power supply)
Insulation resistance (500 VDC)≥ 10 MΩ
Electromagnetic compatibility
Voltage, current and ratiometricWorth
ESD, EN 61000-4-24 kV, 8 kV
Electromagnetic fields, EN 61000-4-310 V/m
Fast transients, EN 61000-4-41 kV
Conducted disturbances, EN 61000-4-610 V ef.
Magnetic fields, EN 61000-4-83 A/m
Noise radiation, EN 55011Class B
Electromagnetic compatibility
Ratiometric, mobileWorth
Radiated HF fields, ISO 11452-230 V/m
HF fields (stripline), ISO 11452-560 V/m
Radiated emission, CISPR 25Level according to ECE-R10
Emission and resistance E1According to ECE-R10
General data and environment
Maximum working speed800 rpm
Vibration IEC 60068-2-620 g, 5 … 2000 Hz, Amax = 0.75 mm
IEC 60068-2-27 Shock50 g, 6 ms
DIN EN 60529 protectionIP54 / IP65 / IP67
Life> 50 million movements (mechanically)
Mechanical data
HousingPPS-GF40/SF50 temperature resistant plastic
AxisStainless steel X8CrNiS18-9 (No. 1.4305)
Fixation2 M4 screws with washers; max. tightening torque 180 Ncm
BearingSintered bronze bushing
Mechanical tourContinuous
Allowable load on the shaft (static or dynamic), axial and radial20 N
Starting torque0.15 Ncm (IP54), 0.5 Ncm (IP65), 1.0 Ncm (IP67)
Weightapprox. 50 g
Electrical connection4 x 0.5 mm² (AWG 20) TPE cable, shielded (mobile: unshielded), or M12x1 connector with 0.15 m cable
ReferenceConfiguration
RSC-2871-836-214-912RSC2871836214912Art. 400020206
RSC-2881-836-214-912RSC2881836214912Art. 400020207
RSC-2891-836-214-912RSC2891836214912Art. 400020208
RSC-2891-836-228-912RSC2891836228912Art. 400020214
RSC-2892-810-226-912RSC2892810226912Art. 400103818
RSC-2892-836-214-912RSC2892836214912Art. 400020209
Novotechnik RSC-2800 Analog Non-Contact Magnetic Angle Sensor
Dimensional drawing of the Novotechnik RSC-2800 analog non-contact magnetic angle sensor

Other products

Monitran-Logo
4-20 mA ∝ rms acceleration | 0-1 to 0-20g | 2Hz to 1kHz ±10% | Ex ia I Ma | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32V DC | Stainless steel, IP67 | Group I (mining)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Graphite sensor with built-in NTC10K, 3m cable, K=1 cm⁻¹Range from 2MicroSiemens to 2,000 milliSiemens,
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire diameter 0.9 mm | Stroke up to 3 m | Resolution 0.1 or 1 mm | SSI, Gray or binary; preset S1/S4 | 10–30 V DC | IP64 (IP65 connectors) | Linearity ±0.05 % fs.
DPF Sensors logo
LVDT displacement sensor, ranges from 10 to 40 mm, with or without probe, with separate electronics.
ATESTEO LOGO, manufacturer of torque sensors
Light Telemetry | 20,000 N·m | Structural Limit 13,000 RPM | PCD Flange 218.0 mm | Inertia 0.1485 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø9.52 h7 | Square flange 63.5 mm | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z seal) | Max. frequency 60 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø50, 55, 60, 65, 70, 75 | Housing Ø170 mm | 1 to 9000 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP55 shaft (IP66 Z seal) | Internal tangential coupling
ATESTEO LOGO, manufacturer of torque sensors
Steady Reaction Transducer | 30,000 – 50,000 N·m | 0 RPM | PCD Flange 290.0 mm | Base Inertia 0.5695 kg·m²
NESA Environmental Meters
Pt100, 0÷2Vdc, 4÷20mA, RS485 | -40 ÷ +60 °C | Pt100 1/3DIN (±0.1°C @ 0°C) | Ø 162 x 220 mm | 10÷30Vdc | Natural or forced ventilation
Shopping Basket