Accelerometer with DC response and 4-20 mA output Monitran MTN/7200

Budget-friendly price Request a quote
Response from DC (0 Hz) | 4-20 mA bipolar output, 12 mA = 0 g | Ranges from ±1 to ±50 g | Power supply 10-30 V DC | -20 to +85 °C | Stainless steel | IP65

The Monitran MTN/7200 is a special-purpose, low-frequency accelerometer with a side output and output response from 0 Hz. It has a 4-20 mA bipolar output for the selected range, with 12 mA as zero g. It is powered by 10-30 V DC and responds, depending on the dynamic range (±5%), from DC up to 250 Hz (±1 g and ±2 g), 300 Hz (±5 g), 500 Hz (±10 g), 700 Hz (±20 g), and 1 kHz (±50 g).

It is manufactured entirely from compact stainless steel, IP65 rated, with an integral PVC cable featuring a stainless steel outer braid, an insulated base, and an operating temperature range of -20 to +85 °C. The series includes the MTN/7200 and MTN/7210 (four-point), MTN/7220 (single-point, 1/4" UNF), MTN/7220F (single-point, 10-32 UNF), and MTN/7220Q (single-point, Quickfit) models. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Bipolar 4-20 mA output for the selected range, with 12 mA as zero g, and response from DC
  • Response (±5%): ±1 g and ±2 g up to 250 Hz, ±5 g up to 300 Hz, ±10 g up to 500 Hz, ±20 g up to 700 Hz and ±50 g up to 1 kHz
  • Five mounting models: four small (MTN/7200) and large (MTN/7210) points, and one ¼" UNF (MTN/7220), 10-32 UNF (MTN/7220F) and Quickfit (MTN/7220Q) points

Technical Frequently Asked Questions

What output does the Monitran MTN/7200 have?

Bipolar output of 4-20 mA for the selected range, with 12 mA as zero g, and response from DC; powered by 10-30 V DC and calibration data is supplied with the sensor.

What mounting models does the MTN/7200 series have?

MTN/7200 (four point, small, requires 4 M3 screws), MTN/7210 (four point, large), MTN/7220 (one point ¼" UNF), MTN/7220F (one point 10-32 UNF) and MTN/7220Q (one point Quickfit).

What is the frequency and temperature response of the MTN/7200?

From DC up to 250 Hz in ±1 g and ±2 g, 300 Hz in ±5 g, 500 Hz in ±10 g, 700 Hz in ±20 g and 1 kHz in ±50 g (±5%); operating temperature from -20 to +85 °C.

Properties

FeatureSpecification
Measure and signal
Measurement ranges±1, ±2, ±5, ±10, ±20 and ±50 g
Exit4-20 mA (depending on the range), bipolar, with 12 mA as zero g; calibration data supplied with the sensor
Frequency responseDepending on dynamic range (±5%): ±1g, DC at 250Hz; ±2 g, DC at 250 Hz; ±5g, DC at 300Hz; ±10 g, DC at 500 Hz; ±20 g, DC at 700 Hz; ±50g, DC at 1kHz
Resonance frequency±1g, 700Hz; ±2g, 700Hz; ±5g, 800Hz; ±10g, 850Hz; ±20g, 1200Hz; ±50g, 1800Hz
Acceleration limitsx20 in any direction
Electrical noise10 µg
IsolationIsolated from the base
Food and environment
Feeding10 – 30 V DC
Operating temperature-20 to +85 °C
Storage temperature-40 to 125 °C
SealedIP65
Housing materialStainless steel
Mechanics and connection
WirePVC with stainless steel outer braid
Wire connectionRed: Power (+); Blue: Power (-); Screen (not connected) to the casing
MountingMTN/7200: Four-point, small (requires 4 M3 screws); MTN/7210: Four-point, large; MTN/7220: One-point 1/4" UNF; MTN/7220F: One-point 10-32 UNF; MTN/7220Q: One-point Quickfit
Dimensions (according to plan)MTN/7200: 25 x Ø21 x 25; MTN/7210: Ø33.0 x 28 x 34; MTN/7220: Ø25.0 x 33
Weight40 g (nominal)
ReferenceConfiguration
MTN/7200 MTN7200Mounting: four points, small · Requires 4 M3 screws MTN/7200 Technical Data Sheet (PDF)
MTN/7210 MTN7210Mounting: four points, large Technical data sheet MTN/7210 (PDF)
MTN/7220 MTN7220Mounting: one ¼" UNF dot Technical data sheet MTN/7220 (PDF)
MTN/7220F MTN7220FMounting: 10-32 UNF MTN/7220F Technical Data Sheet (PDF)
MTN/7220Q MTN7220QAssembly: One Quickfit point Technical data sheet MTN/7220Q (PDF)
Accelerometer with DC response and 4-20 mA output Monitran MTN/7200
Dimensions and colors of the threads of the Monitran MTN/7200 accelerometer

Other products

DPF Sensors logo
Safety tilt controller for platforms.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø27 mm | Shaft Ø3.17 h7, centered Ø25.4 h7 | 50–800 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø38 mm, spindle Ø6.35 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP64 spindle (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
ATESTEO LOGO, manufacturer of torque sensors
Electromagnetic Acquisition (iS Series) | Flexible Range 50 – 100 N·m | Titanium Forging | 101.5 mm PCD Flange | Inertia 0.00210 kg·m²
Monitran-Logo
4-20 mA ∝ rms speed | 0-10 to 0-100 mm/s | 2Hz to 1kHz ±10% | Ex ia IIC T6 Ga · Ex ia IIIC T85 °C Da | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32V DC | Stainless steel, integrated cable, IP67 (IW: IP68)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive, non-contact | CAN SAE J1939 | Stroke 50 … 2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC (8 … 34 VDC) | 350 bar · IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
PROFIBUS-DP Class 2, 12 Mbaud | Hollow shaft Ø10 H7, housing Ø90 | Internal star coupling | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP65 shaft (IP66 sealed)
DPF Sensors logo
Radar level measurement for dams and open channels
NESA Environmental Meters
Manual | Class A or A+ | 200 cm² | 0 ÷ 12.5 mm | 0.05mm / 0.04mm | 0 ÷ 60°C
Shopping Basket