Schreiber SM64 Series Redundant Angular LVDT

Redundant Angle LVDT | Independent Dual Channel 2 x 60° | IP68 Hermetic Protection | Stainless Steel Housing 7kg | 80.0 mm PCD Flange | 4-20mA / ±10V Outputs | EMI Immunity

He angular LVDT The redundant Schreiber SM64 series represents the safety-critical standard in rotary measurement for extreme conditions. This device, technically classified as a dual-system inductive transducer, integrates two electrically isolated measuring channels in a massive 7 kg stainless steel housing. This architecture ensures a signal stability and EMI immunity absolute, allowing a 1:1 compatibility / drop-in replacement in naval rudder control systems, port cranes and port machinery where the failure of a sensor would paralyze the logistics operation.

Designed to withstand immersion and harsh saline environments with protection IP68, This angle transducer eliminates mechanical wear by lacking internal physical contact, ensuring an accuracy of 0.5% for millions of cycles. The SM64 is the ideal rotary position sensor for industrial installations requiring direct PLC redundancy, combining the ease of finding an "angular LVDT" with the robustness of heavy-duty, naval-grade armored German equipment. See here for the dimension diagram for mounting on an 80.0 mm flange.

Properties

Geometry and Electrical SpecificationTechnical Details SM64
Redundant Configuration2 Independent Systems (Galvanic Isolation)
Angular Measurement Range2 x 60° (Configurable for symmetrical ranges)
Analog Outputs (.641-4)Dual channel 4-20 mA | 0-20mA (CW/CCW)
Voltage Outputs (.645-8)Dual channel ±10 VDC | 0-10VDC
Bolt Circle (PCD)80.0 mm (4 fixing screws)
Degree of WatertightnessIP68 (Total protection against immersion)
Linearity (Precision)± 0.5% FS (Schreiber metrological guarantee)
Total Equipment Mass~ 7 kg (Massive anti-vibration design)
EMI shieldingTotal immunity against external magnetic fields
Temperature RangeIndustrial range -40 °C to +85 °C
Shock Resistance20 g SRS (Heavy Duty Protocol)
Bandwidth800 Hz (Dynamic response on each channel)
Operating Voltage20-32 VDC (Internal filtering included)
Electrical InterfaceCable outlet with stainless steel cable gland Pg
Housing MaterialSpecial Stainless Steel (High corrosion resistance)
Schreiber SM64E angular LVDT sensor for rotary position measurement.

Other products

Housing Ø59 mm | Stainless Steel Shaft Ø 6–15 mm | Operating Temp. -20 – +85 °C | Resolution 8 bits (256 positions) | Max. Load 4 kg | Max. Frequency 500 kHz | Weight 340 g | Vibration 12 G (10 – 2000 Hz) | Impacts 50 G x 11 ms | A/759C | Programmable up to 65,536 revolutions | Power Supply 10–30 V DC | Max. RPM 4096
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow Shaft Ø6-15mm | Weight 290g | Bearing Life 1.5×10^9 rev | Impact Resistance 50G | Operating Temperature 0-70°C | Maximum Frequency 100kHz | Standard Consumption 120mA | Protection IP65/IP66 | Output Push-Pull/Line Driver | Power Supply 5-30V
Differential pressure switch for air
Analog-digital CO2, humidity and temperature controller sensor with LED signaling, relay alarm, for indoor use.
Monitran-Logo
Dual Output | 4-20mA Acceleration + AC Output | Configurable Acceleration Range | 2Hz-1kHz Frequency | 12-32V DC Power Supply | -25 to 90°C Temperature | IP67 Protection | Stainless Steel | Insulated Base | 3-pin Connector | 62GB
Pressure transducer + temperature sensor
LEVEL MEASUREMENT
NCTE Rotary Torque Sensor | 2300 Series | 100Nm | 10,000 RPM
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø6÷15mm | Weight 320g | IP65 Output | Temperature -30÷85°C | Bearing Life 1.5×10^9 revs | Starting Torque >85 gcm | Max Frequency 100kHz | Pulses/Rev 1-3600 | Anodized Aluminum Base | Valox 420 Cover
Shopping Basket