UTA Thermohygrometer

Budget-friendly price Request a quote
Humidity and temperature sensor

El termohigrómetro UTA de NESA es un sensor combinado de temperatura y humedad relativa del aire, conforme a los estándares técnicos de la Organización Meteorológica Mundial (OMM). Existe una versión con ventilación forzada (código UTAV); la ventilación natural corresponde al código AHU.

Temperatura: elemento sensor RTD Pt100 clase 1/3 DIN (100Ω @ 0°C). Rango de medición típico: -40 ÷ +60 °C (-60+70 °C disponible). Resolución: 0,01 °C. Precisión: DIN 43760 1/3DIN (±0.1°C @ 0°C). Tiempo de respuesta: < 8 s. Salida directa Pt100 con conexión de cuatro hilos, o señal normalizada en corriente (4–20 mA), voltaje (0–2 Vdc) o comunicación digital RS485 con protocolo Modbus.

Humedad relativa: tecnología capacitiva de baja potencia (<0,1 W), con película delgada. Rango de medición: 0 ÷ 100 % de humedad relativa. Resolución: 0,05 %. Precisión: ± 2% f.s. Tiempo de respuesta: < 8 segundos (10÷80 % de humedad relativa). Salida en voltaje (0–1 Vdc), corriente (4–20 mA) o digital RS485/Modbus.

Señal de salida según código:

  • N: 0÷1 Vdc (Rh) y pt100 (T).
  • A: 0÷1 Vdc (Rh) y 0÷2 Vdc (T).
  • B: 4÷20 mA (Rh) y 4÷20 mA (T).
  • C: 2 x RS485/ModBus.

Condiciones de funcionamiento: -50 ÷ +80 °C (-60 ÷ +80 °C disponibles). Alimentación: 10÷28Vdc (típ. <0.1W, máx. 2W@12Vdc mod. TAV). Protecciones: contra inversión de polaridad y descargas atmosféricas. Material: aleación de aluminio anodizado y tornillos de acero inoxidable. Peso: 680 g.

Aplicaciones: estaciones meteorológicas automáticas, sistemas de climatización (HVAC), control ambiental en invernaderos, laboratorios, almacenes. Integración en sistemas SCADA, PLC o redes de monitoreo remoto.

Properties

Data  technicians

Typical temperature measuring range [humidity]

-40 ÷ +60 °C, [0 ÷ 100 % relative humidity]

(-60+70 °C available)

Temperature resolution [humidity]0.01 °C, [0,05 %]
Temperature accuracy [humidity]DIN 43760 1/3DIN (±0.1°C @ 0°C), [± 2% fs]
Temperature response time [humidity]< 8 s, [< 8 seconds (10÷80 % relative humidity)]
Transducer typePlatinum resistor Pt100 1/3DIN (100Ω @ 0°C), [capacitive]
VentilationNatural (cod. AHU)

Forced (code. UTAV)

Exit signN: 0÷1 Vdc(Rh) and pt100 (T)

TO: 0÷1 Vdc(Rh) and 0÷2 Vdc (T);

B: 4 ÷ 20 mA (Rh) and 4 ÷ 20 mA (T)

C: 2 x RS485 /ModBus

Operating conditions-50 ÷ +80 °C (-60 ÷ +80 °C available)
ProtectionsAgainst polarity reversal and atmospheric discharges
Made ofAnodized aluminum alloy, stainless steel screws
Food and consumption10÷28Vdc, (typ.<0.1W, max. 2W@12Vdc mod. TAV)
Weight680 g
I'm interested

Related documentation, cases, and guides

Technical documentation

All technical information about GUEMISA

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
ELCIS VE66 electronic steering wheel

VE66 Electronic Steering Wheel

Incremental output | Ø66 mm drive | 100 pulses/revolution with latching | NPN, PNP, push-pull, driver | 5–30 V power supply | IP64 shaft side (IP65 cable) | 1 m CV radial cable
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
ELCIS A/763 single-turn absolute encoder

Single-turn Absolute Encoder A/763

Square flange 63, shaft Ø9.52 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental encoder for ELCIS I/59P motors

Incremental Encoder for I/59P Motors

Shaft Ø4, 6, 8, 9.52 or 10 mm H7 | Flange Ø59.5 mm | 1 to 2540 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP53 shaft side | Elastic, electrical zero alignment
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity probe SI315.1 Brand B&C Electronics

SI315.1 TOROIDAL CONDUCTIVITY SENSOR

Range 2mS to 20S, For use in line with DIN11851 connector and C565.2 or C7685 controller.

TP1

Industrial pressure transducer.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
ELCIS I/170D High Resolution Incremental Encoder

High Resolution Incremental Encoder I/170D

Spindle Ø14 h6, housing Ø170 mm | Centering Ø140 h6 | 18000–900000 impedances/revolution | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 spindle (IP65 output with cable) | ±2.5″; 2200 kHz with interpolation
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Robust incremental encoder ELCIS I/115E

Robust Incremental Encoder I/115E

Housing Ø63.5 mm | B10 type flange (Ø115) | Ø11 h7 stainless steel shaft | 1 to 10000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental encoder for ELCIS I/72A motors

Incremental Encoder for Motors I/72A

Hollow shaft Ø10, 12, 14, 15 or 20 mm | Housing Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Compensation ±3 mm axial, ±2°
Monitran-Logo
Monitran MTN/7000 industrial accelerometer with frequency response from 0Hz (DC).

MTN/7000 DC and AC Response Accelerometer

MEMS Technology | DC and AC Response | Frequency 0Hz-1kHz | Sensitivity 100mV/g | Dynamic Range ±2g to ±500g | Differential Output | Temperature -55 to 125°C | IP67 Protection | Stainless Steel | Ideal for Slow-Moting Machinery

Travel switches

SCROLL SWITCH
Shopping Basket