Sensor de ángulo magnético sin contacto RSC-2800 SPI

SPI, nivel TTL | Ø 28 mm | Resolución 14 bits | Eje Ø 6 mm o acoplamiento a presión | 5 VDC (4,5 … 5,5 VDC) | IP54 / IP65 / IP67 | Artículo de proyecto

Sensor de ángulo magnético RSC-2800 SPI de Novotechnik. Sensor magnético sin contacto, de 360°.

El RSC-2800 mide el ángulo con una técnica magnética sin contacto: a diferencia de los sensores Hall convencionales, mide la orientación del campo magnético. La información de posición se transmite por interfaces analógicas y digitales. La carcasa es de un plástico resistente a la temperatura y sus ranuras alargadas permiten el montaje y el ajuste mecánico. Hay tres versiones de eje, entre ellas un acoplamiento a presión para una instalación rápida.

Puntos clave

  • Tecnología magnética sin contacto
  • Rango de medida de 360°
  • Con acoplamiento a presión o con eje marcado
  • Protección IP54, IP65, IP67
  • Vida larga; histéresis muy pequeña
  • Resolución de 14 bits; linealidad < ±0,5 %

Technical Frequently Asked Questions

¿Qué se puede conectar al sensor de ángulo magnético RSC-2800 SPI?

Se le pueden conectar acoplamientos y accesorios para sensores rotativos de Novotechnik.

¿Cómo se pide el sensor de ángulo magnético RSC-2800 SPI?

El código de pedido tiene 5 casillas: versión mecánica, resolución, interfaz, parámetros y conexión. Por ejemplo, RSC-2832-214-831-302 es la versión con eje Ø 6 mm con plano, IP65, SPI de 14 bits, Ub = 5 VDC, código binario creciente en sentido horario y cable apantallado de 5 polos y 1 m. En la tabla de referencias de esta página están todas las referencias de pedido con su Art.

¿En qué condiciones trabaja el sensor de ángulo magnético RSC-2800 SPI?

Temperatura de trabajo: -40 … +85 °C. Protección: IP54 / IP65 / IP67.

Properties

FeatureSpecification
Datos de medida
ProtocolSPI
Nivel SCLK, MOSI, /SSNivel TTL (ver la nota de aplicación del protocolo SPI)
Resolución (en 360°)14 bits
Independent linearity≤ ±0.5 % FS
Repeatability≤ ±0,1°
Hysteresis≤ ±0,1°
Datos eléctricos
Frecuencia de actualización (interna)5 kHz
Measuring range360°
Hysteresis≤ ±0,1°
Error de temperatura±0,625 % FS
Tensión de alimentación Ub5 VDC (4,5 … 5,5 VDC)
Consumo de corriente sin cargatíp. 15 mA
Reverse polarity protectionSí (líneas de alimentación)
Protección contra cortocircuitoSí (frente a GND y a Ub)
Maximum clock frequency400 kHz
Resistencia de aislamiento (500 VDC)≥ 10 MΩ
Velocidad máx. de trabajo800 rpm
Vibración IEC 60068-2-620 g, 5 … 2000 Hz, Amax = 0,75 mm
Choque IEC 60068-2-2750 g, 6 ms
Protección DIN EN 60529IP54 / IP65 / IP67
Working temperature-40 … +85 °C
Life> 50 millones de movimientos (mecánicamente)
MTTF (IEC 60050)316 años
Electromagnetic compatibility
ESD, EN 61000-4-2 (descarga por contacto y por aire)4 kV, 8 kV
Campos electromagnéticos (RFI), EN 61000-4-310 V/m
Transitorios rápidos (burst), EN 61000-4-41 kV
Perturbaciones conducidas (campos de HF), EN 61000-4-610 V ef.
Campos magnéticos, EN 61000-4-83 A/m
Radiación de ruido, EN 55011Clase B
Datos mecánicos
HousingPlástico PPS-GF40/SF50 resistente a la temperatura
AxisAcero inoxidable X8CrNiS18-9 (n.º 1.4305)
Fixation2 tornillos M4 con arandelas; par de apriete máx. 180 Ncm
BearingSintered bronze bushing
Mechanical tourContinuo
Carga admisible en el eje (estática o dinámica), axial y radial20 N
Starting torque0,15 Ncm (IP54), 0,5 Ncm (IP65), 1,0 Ncm (IP67)
Weightaprox. 50 g
Electrical connectionCable 5 x 0,14 mm² (AWG 26) PUR, apantallado
Connection assignment
SignCable 3..
Tensión de alimentación UbGN
GNDBN
MOSI y MISOYE
SCLKGY
/SS (selección de esclavo)WH
ReferenceConfiguration
RSC-2871-836-214-912RSC2871836214912Art. 400020206
RSC-2881-836-214-912RSC2881836214912Art. 400020207
RSC-2891-836-214-912RSC2891836214912Art. 400020208
RSC-2891-836-228-912RSC2891836228912Art. 400020214
RSC-2892-810-226-912RSC2892810226912Art. 400103818
RSC-2892-836-214-912RSC2892836214912Art. 400020209
RSC-3202-806-214-521RSC3202806214521Art. 400047206
RSC-3202-806-224-521RSC3202806224521Art. 400047205
RSC-3202-806-229-521RSC3202806229521Art. 400047207
RSC-3202-812-214-521RSC3202812214521Art. 400047209
RSC-3202-812-224-521RSC3202812224521Art. 400047208
RSC-3202-812-229-521RSC3202812229521Art. 400047210
RSC-3202-818-214-521RSC3202818214521Art. 400047212
RSC-3202-818-224-521RSC3202818224521Art. 400047211
RSC-3202-818-229-521RSC3202818229521Art. 400047213
RSC-3202-824-214-521RSC3202824214521Art. 400047215
RSC-3202-824-224-521RSC3202824224521Art. 400047214
RSC-3202-824-229-521RSC3202824229521Art. 400047216
RSC-3202-836-214-521RSC3202836214521Art. 400047218
RSC-3202-836-224-521RSC3202836224521Art. 400047217
RSC-3202-836-229-521RSC3202836229521Art. 400047219
Sensor de ángulo magnético sin contacto RSC-2800 SPI Novotechnik
Plano dimensional Sensor de ángulo magnético sin contacto RSC-2800 SPI Novotechnik

Other products

Disibeint Electronic, manufacturer of level sensors and control relays
Level float for automatic filling and emptying control
Dimetix_AG-1
Advanced High-Speed, High-Performance Industrial Communication Solution Range: Native IP65 integration with 10/100 Mbit/s transfer
B&C ELECTRONICS Logo 2026 WATER QUALITY
ORP probe by immersion in PVC tube. Length 720 mm. With SZ275 probe
ATEX pressure transducer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø90 mm, shaft Ø12 h7 | 1–1250 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP66 shaft (IP67 sealed) | Duplicate detector and amplifier | Externally switchable
B&C ELECTRONICS Logo 2026 WATER QUALITY
pH probe for immersion in PVC tube. Length 720 mm.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Tapa de protección | Brida Ø115 mm, centrado Ø85 h7 | Eje Ø11 h7 acero inoxidable | 1 a 3600 imp/vuelta | NPN, push-pull, driver o discrim. | Alimentación 5–30 V | IP65 eje (IP66 con sellado Z)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø114, flange B10 Ø115 | Shaft Ø11 h7 stainless steel | 1 to 90000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft (IP67 sealed) | CE Ex II 3GD, category 3
Dimetix_AG-1
Non-contact measurement and positioning up to 100 m over natural surfaces and 500 m with reflector, with typical accuracy of ±1 mm and measurement speed of up to 250 Hz.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6–12 mm | Internal coupling | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with option Z) | ATEX Ex d IIC T6
Shopping Basket