IP67 potentiometric transducer, protected stem LWX-004

Budget-friendly price Request a quote
Potentiometric output | Stroke 50 … 750 mm | Linearity ±0.04 … ±0.2 % | Resolution < 0.01 mm | 42 V max. | IP67 | M12 connector or cable

Novotechnik LWX-004 IP67 potentiometric transducer. Metal housing with stem protection tube.

Potentiometric linear position transducer with ball joint mounting and stem protected by a tube. Electrical stroke from 50 to 750 mm. IP67, independent linearity from ±0.04 to ±0.2%, resolution better than 0.01 mm. Metal housing with differential pressure compensation.

Key points

  • IP67 protection
  • Metal casing with protective tube
  • Differential pressure compensation with GORE membrane (stem pumping effect)
  • Double-supported stem
  • Low-play ball joints, free rotation up to ±12.5°
  • Linearity up to ±0.04%

Technical Frequently Asked Questions

What can be connected to the IP67 potentiometric transducer, LWX-004?

It can be connected to Novotechnik M12 connectors and cables, Novotechnik linear sensor couplings and mountings, signal conditioners for standardized output signals (e.g., MUP-110) MUP, signal conditioners for standardized output signals MUK, and process-controlled indicators with MAP display.

How do I order the IP67 potentiometric transducer, LWX-004?

The order code has three fields: stroke (mm), model, and connection. For example, LWX-0150-004-101 is the version with a defined electrical stroke of 150 mm, model 004, and an M12x1 connector output. With 201 instead of 101, the output is a 1 m cable. All order references with their corresponding part numbers are listed in the reference table on this page.

Under what conditions does the IP67 potentiometric transducer, LWX-004, operate?

Operating temperature: -30 … +100 °C. Protection: IP 67, also dynamic.

Properties

FeatureSpecification
Description
HousingAnodized aluminum
MountingKnee joints
Ball joints, standard modelSteel
Ball joints, optionalStainless steel for outdoor and corrosive environments (conversion kit, see accessories)
StemStainless steel (material no. 1.4305), swivel
BearingsMetal-polymer sliding bearings
Resistive elementConductive plastic
CursorMulti-finger made of precious metal, cushioned by elastomer
Electrical connectionM12x1 4-pole round connector; or 1 m shielded 3-wire PVC cable, 3 x 0.5 mm² (AWG 20).
Electrical data
Resistance tolerance± 20 %
Repeatability0.01 mm
Recommended cursor current≤ 1 µA
Maximum cursor current in case of failure10 mA
Maximum permissible applied voltage42 V
Effective temperature coefficient of the output voltage / applied voltage ratiotyp. 5 ppm/K
Insulation resistance (500 VDC)≥ 10 MΩ
Dielectric strength (500 VAC, 50 Hz)≤ 100 µA
Mechanical data
Horizontal drive forcetyp. 50 N
Vertical drive forcetyp. 50 N
Horizontal starting force (*)150 N
Environmental conditions
Working temperature-30 … +100 °C
Working humidity0 … 95 % HR (non-condensing)
Vibration5 … 2000 Hz, Amax = 0.75 mm, amax = 20 g
Shock50 g, 11 ms
Lifetypical > 50 x 10⁶ movements
Maximum working speed5 m/s
Protection (DIN EN 60529)IP 67, also dynamic
Connection assignment
ConnectionCable color
1brown
2black
3red
ReferenceConfiguration
100100Art. 400026504 · Connector: reference: LWX-0100-004-101 · 1 m cable: reference: LWX-0100-004-201 · Art.: 400026604
150150Art. 400026506 · Connector: reference: LWX-0150-004-101 · 1 m cable: reference: LWX-0150-004-201 · Art.: 400026606
175175Art. 400026507 · Connector: reference: LWX-0175-004-101 · 1 m cable: reference: LWX-0175-004-201 · Art.: 400026607
225225Art. 400026509 · Connector: reference: LWX-0225-004-101 · 1 m cable: reference: LWX-0225-004-201 · Art.: 400026609
250250Art. 400026510 · Connector: reference: LWX-0250-004-101 · 1 m cable: reference: LWX-0250-004-201 · Art.: 400026610
300300Art. 400026512 · Connector: reference: LWX-0300-004-101 · 1 m cable: reference: LWX-0300-004-201 · Art.: 400026612
360360Art. 400026514 · Connector: reference: LWX-0360-004-101 · 1 m cable: reference: LWX-0360-004-201 · Art.: 400026614
450450Art. 400026518 · Connector: reference: LWX-0450-004-101 · 1 m cable: reference: LWX-0450-004-201 · Art.: 400026618
5050Art. 400026502 · Connector: reference: LWX-0050-004-101 · 1 m cable: reference: LWX-0050-004-201 · Art.: 400026602
500500Art. 400026520 · Connector: reference: LWX-0500-004-101 · 1 m cable: reference: LWX-0500-004-201 · Art.: 400026620
600600Art. 400026524 · Connector: reference: LWX-0600-004-101 · 1 m cable: reference: LWX-0600-004-201 · Art.: 400026624
7575Art. 400026503 · Connector: reference: LWX-0075-004-101 · 1 m cable: reference: LWX-0075-004-201 · Art.: 400026603
750750Art. 400026530 · Connector: reference: LWX-0750-004-101 · 1 m cable: reference: LWX-0750-004-201 · Art.: 400026630
Novotechnik LWX-004 IP67 potentiometric transducer with protected stem
Dimensional drawing Potentiometric transducer IP67, protected stem LWX-004 Novotechnik

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø44 mm, shaft Ø6 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | Max. frequency 500 kHz | Impacts 100 G (6 ms)
DPF Sensors logo
HIGH temperature transducer
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current, or ratiometric output | Ø 48 mm | 12-bit resolution | Shaftless: magnetic position marker | 5 VDC, 12/24 VDC, or 24 VDC | IP67 / IP68 / IP69 | 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Emergency stop, optional handle | 100 imp/revolution with latching | NPN, PNP, push-pull, driver | 5V or 8–28V power supply | IP64 shaft (IP65 output) | Optional enable push button
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Current output 4 … 20 mA | Ø 69 mm | 12-bit resolution | Shaftless: magnetic position marker | 12/24 VDC (9 … 34 VDC) | IP67 / IP69K | 60° to 360°, 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire Ø 1.35 mm | Stroke 40, 50 or 60 m | Resolution 0.1 or 1 mm | PROFIBUS-DP Class 2 | 10–30 V DC | IP64 (IP65 connection covers) | Linearity ±0.05 % fs.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-hole shaft Ø20 H6 | Ø90 mm, tangential coupling | 9000–900000 imp/rev | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 shaft (IP65 wired output) | ±5″; 2200 kHz with interpolation
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Profile 18 x 18 mm | Stroke 10 … 100 mm | Linearity ±0.05 … ±0.25 % | Repeatability ±0.002 mm | IP40 | Cable, connector M8 or M16
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductive, contactless | CANopen DS-406 | Stroke 100 … 1000 mm | Resolution 1 or 5 µm | Linearity ≤ ±100 µm | 18 … 32 VDC | IP67
Shopping Basket