NRA-1/2
RESISTIVE PROBES
- Manufacturer: Disibeint Electronic
- Category: SENSORS, Level Sensors, Level Sensors for Liquids
RESISTIVE PROBES. Can be used with food and pharmaceutical products
Properties
- Can be used with food and pharmaceutical products
- Process connection: 1″1/2 G threaded plug (PTFE)
- Electrical connection: DIN43650 connector
- Temperature: +100 ºC
- Pressure: 1 kg/cm² (at 20ºC)
- Protection: IP65
- Maximum 4 electrodes
- Polyolefine PE coated electrodes option
Other products
Range 2mS to 20S, For use in line with DIN11851 connector and C565.2 or C7685 controller.
PL200 Hellmann Manual Rain Gauge
pH probe for immersion in PVC tube. Length 1170 mm.
Top Input | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Insulated Base | 2-pin Connector Mil-C-5015
Power supply 5V | Shaft Ø6.35mm | Weight 180g | Push-Pull output | IP65 protection | Bearing life 1.5×10^9 rev | Max RPM 6000 | Starting torque 30 gcm | Temperature 0÷70°C | Pulses/Rev 2540
Maximum Temp. 250°C | Sensitivity 50pC/g | Output 100mV/g (Amp) | Frequency 0.8Hz-12kHz | High Temp Integral Cable | No Electronics in Head | In-line Amplifier Required | Stainless Steel | IP67 Protection | Range ±80g
ORP probe by immersion in PVC tube. Length 720 mm. With SZ275 probe