UR air relative humidity sensor

Budget-friendly price Request a quote
0-1Vdc, 4-20mA, RS485 | 0-100% RH | Capacitive (thin film) | Ø 162 x 220 mm | 10-30Vdc | Natural or forced ventilation

The NESA UR is a relative humidity sensor with a thin-film capacitive transducer, measuring range of 0 ÷ 100 %Rh, resolution less than 0.1% and anti-radiation shelter compliant with WMO and EN 15518-3:2011.

The capacitive variation of the sensing element is converted into a standardized signal in voltage 0–1Vdc (UR-A, URV-A), current 4–20mA (UR-B, URV-B), or RS485/ModBus RTU digital bus (UR-C, URV-C). It is manufactured in an anodized or painted aluminum alloy body (IP68 connector), in versions with natural ventilation (code UR) or forced ventilation (code URV).

Key points

  • Thin-film capacitive transducer with a range of 0 ÷ 100 %Rh and a resolution of less than 0.1%
  • Accuracy of ±1% @ 23°C and response time less than 8 s (10÷80%RH)
  • Anti-radiation screen with natural ventilation (UR) or forced ventilation (URV) in accordance with WMO and EN 15518-3:2011
  • Available outputs: 0÷1Vdc (A), 4÷20mA (B) and RS485 / ModBus RTU (C)
  • Anodized or painted aluminum alloy body with stainless steel screws and IP68 7-pin connector

Technical Frequently Asked Questions

What output signals does the UR relative humidity sensor deliver?

It is available in three output versions: A (0÷1Vdc voltage proportional to 0÷100 %Rh), B (4÷20mA non-self-powered current) and C (RS485 Half duplex digital interface with ASCII xxxCR request or ModBus RTU function 0x03 in registers 40002 – 40003 in IEEE754 32-bit format at 9600 baud, 8N1).

How do I order the UR relative humidity sensor?

The order code combines the sensor (UR with natural ventilation or URV with forced ventilation), the outlet (A, B, or C), the sensor-datalogger cable (05 = CS05 of 5 m, 10 = CS10 of 10 m, xx* = CSxx, length in meters to be specified in the order), and the SSU sensor bracket with a length of L = 700-750 mm. Manufacturer example: UR C 10 SSU. The model references are UR-A, UR-B, UR-C, URV-A, URV-B, and URV-C.

Under what environmental conditions does the UR sensor operate?

It operates in conditions of -50 ÷ +80 °C, with electrical protection against reverse polarity and transients, IP68 connector and wind resistance up to 50 m/s (60 m/s gusts).

Properties

FeatureSpecification
Measurement and sensitive element
Measured magnitudeRelative humidity of the air
Typical measurement range0 ÷ 100 %Rh
Transducer typeThin-film capacitive
Precision±1% @ 23°C
Resolution< 0.1%
Sensitivity0,5 %
Linearity1.5% in the interval 20…90%
Repeatability0,1 %
Response time< 8 s (10÷80 %RH); time constant in air < 12 s (63% of the variation in the sampling interval)
VentilationNatural (URV code) or forced (URV code)
Regulatory complianceWMO · EN 15518-3:2011 · CE
Output signals and interface
Voltage output (version A)0÷1Vdc (0÷100 %Rh; %Rh = V · 100)
Current output (version B)4÷20mA not self-powered (%Rh = (100 · (mA – 4)) / 16)
Digital output (version C)RS485 Half duplex (ASCII request xxxCR) or RS485 / Modbus RTU (function 0x03, registers 40002 – 40003 IEEE754 32 bits), via MCS interface; Standard ID 002
RS485 communication parameters9600 baud, N parity, 8 data bits, 1 stop bit
Output impedance60÷200 Ω
Standard ID (version C)002
CalibrationBy comparison with a reference sensor certified by Accredia; comes with a calibration report
Power supply, environment, and mechanical data
Feeding10÷30Vdc
ConsumptionTypical < 0.1 W · Maximum 2 W @ 12Vdc (TAV mod., forced ventilation)
Electrical protectionsAgainst polarity reversal and transients
Operating conditions-50 to +80 °C; wind 50 m/s (gusts of 60 m/s)
Connector protection rating7-pin IP68 connector
Construction materialAnodized or painted aluminum alloy, stainless steel screws
DimensionsØ 162 mm; height 220 mm
Weight680 g
ReferenceConfiguration
UR-AURAModel: UR · Ventilation: Natural · Output signal: 0÷1Vdc (0 ÷ 100 %Rh)
UR-BURBModel: UR · Ventilation: Natural · Output signal: 4÷20mA (0 ÷ 100 %Rh)
UR-CURCModel: UR · Ventilation: Natural · Output signal: RS485 / ModBus RTU
URV-AURVAModel: URV · Ventilation: Forced · Output signal: 0÷1Vdc (0 ÷ 100 %Rh)
URV-BURVBModel: URV · Ventilation: Forced · Output signal: 4÷20mA (0 ÷ 100 %Rh)
URV-CURVCModel: URV · Ventilation: Forced · Output signal: RS485 / ModBus RTU
NESA UR Relative Humidity Sensor
Dimensional drawing and connector of the NESA UR air relative humidity sensor

Other products

ATESTEO LOGO, manufacturer of torque sensors
Strain Gauges (DMS) | 50 – 10,000 N·m | Stationary Standard | PCD Flanges 84.0 – 196.0 mm
DPF Sensors logo
High precision single axis solar tracking controller.
DPF Sensors logo
Illuminance sensor, lux meter, measuring range: 0-2000lux / 0-20klux / 0-200klux
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □63.5, shaft Ø9.52 h7 | Up to 1024 steps (10 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP54 shaft (IP65 sealed) | Gray or Excess
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □80, centered Ø40 h7 | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø36.5 mm, hollow shaft Ø6 mm | Built-in elastic coupling | 12 bits/revolution; 25 bits/8192 revolutions | SSI (RS422), Gray or binary | 10–30 V power supply | IP64 shaft | 12000 rpm
DPF Sensors logo
Anemometer with direct alarm output (adjustable) via relay contact. Also available with 4 to 20 mA output.
ATESTEO LOGO, manufacturer of torque sensors
Massive Inductive Metrology | Limit 10,000 N·m | 12,000 RPM | PCD Flange 196.0 mm | Accuracy 0.02% | Inertia 0.0470 kg·m²
Monitran-Logo
4-20 mA ∝ rms speed | 0-10 to 0-100 mm/s | 2Hz to 1kHz ±10% | Ex ia IIC T6 Ga · Ex ia IIIC T85 °C Da | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32V DC | Stainless steel, IP67
Dimetix_AG-1
Non-contact measurement and positioning up to 100 m over natural surfaces and 500 m with reflector, with typical accuracy of ±1 mm and measurement speed of up to 250 Hz.
Shopping Basket