Sulfur dioxide sensor S-SO2
Budget-friendly price Request a quote
4÷20mA / ModBus RS485 | SO2 | 0÷50 ppm | -30 ÷ 50°C | 11…30 Vdc | IP54 | 230g
- Manufacturer: Nesa
- Category: Gases - Particles, Meteorology – Climatology, SENSORS
El NESA S-SO2 es un sensor para la medición de la concentración de SO2 (dióxido de azufre) para aplicaciones industriales y ambientales, específicamente realizado para aplicaciones en exterior con grado de protección IP54.
Electrochemical or infrared (NDIR) measurement principle (depending on the gas), range 0÷50 ppm, resolution <0.1 ppm and response time <35 s. Output 4÷20mA / ModBus RS485.
Key points
- Range 0÷50 ppm; resolution <0.1 ppm; overload limit 100 ppm
- Tiempo de respuesta <35 s; vida útil >24 meses
- Output 4÷20mA / ModBus RS485; power supply 11…30 Vdc; consumption < 2VA
- Operating range -30 ÷ 50°C; humidity 15…90 %RH non-condensing; IP54; 230 g; CE
Technical Frequently Asked Questions
What range and resolution does it have?
0÷50 ppm, with resolution <0.1 ppm.
What exits does it have?
4÷20mA / ModBus RS485.
What is their diet and consumption like?
Power supply 11…30 Vdc and consumption < 2VA.
Properties
| Feature | Specification |
|---|---|
| Measurement and operating principle | |
| Gas | SO2 (sulfur dioxide) |
| Measurement principle | Electrochemical or infrared (NDIR) (depending on the gas) |
| Range | 0-50 ppm |
| Resolution | <0.1 ppm |
| Response time | <35 s |
| Shelf life | >24 months |
| Overload limit | 100 ppm |
| Exit signals | |
| Exit sign | 4÷20mA / ModBus RS485 |
| Power supply, environment, and mechanical data | |
| Feeding | 11…30 Vdc |
| Consumption | < 2VA |
| Operating range (°C) | -30 to 50°C |
| Humidity | 15…90 %RH non-condensing |
| Degree of protection | IP54 |
| Use | For outdoor use |
| Dimensions | View map |
| Weight | 230 g |
| Regulatory compliance | EC |
| Reference | Configuration |
|---|---|
| S-SO2SSO2 | Output: Modbus RTU · Supply: Full scale 50 ppm, IP54, with 1 m cable |


Related documentation, cases, and guides
Other products

B&C SZ165 pH sensor with 9m cable, combined glass/reference electrode for general pH measurement in industrial processes and instrumentation.

Slot Sensor | 22mm Pitch | 20mm Stroke | 4-20mA, ±10V Outputs | IP66 Hermetic | Infinite Resolution | High Repeatability

0÷2Vdc · 4÷20mA · RS485/Modbus | 0÷100% VWC · -40°C ÷ +70°C | FDR 70MHz · PT100 | AISI 316L STAINLESS STEEL electrodes | 71 x 45 x 16mm | 12÷24Vdc | IP68

Housing Ø58, shaft Ø10 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed) | Gray, Binary, Excess or BCD

Termopar tipo K | -200 a 1200 °C | 8 canales por módulo | ±1 K | 1000 V de trabajo · CAT III | Bus CAN

Industrial digital pH indicator and transmitter with 4…20 mA output, LCD display and Pt100 compensation for DIN rail mounting.

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in data logger, with probe.

Servo flange Ø41.5 mm, shaft Ø6.35 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)

LVDT presurizado de CA o CC | PE: ±25 a ±500 mm, brida y salida radial | PES-2: ±25 a ±300 mm, rosca 1 5/8″-12UN-2A y salida axial | No linealidad ±0,5% | Conector MS de 6 pines IP55