LPxx Piezometric Level Sensor

Budget-friendly price Request a quote
Piezometric capsule | 0–5 to 0–50 m H2O | < 0.2% fs or better | 4–20 mA | Current loop or 10–28 Vdc | 316 stainless steel | PUR cable

El NESA LPxx es un sensor para la medida del nivel hidrométrico (piezómetro), con una cápsula piezométrica alojada en un cuerpo cilíndrico de acero inoxidable AISI316. Se emplea como hidrómetro en agua limpia, con compensación automática de la presión atmosférica mediante cable especial.

Rangos de 0÷5 a 0÷50 m H2O (LP05-B, LP10-B, LP15-B, LP20-B, LP30-B y LP50-B), sensibilidad 0,001 bar, exactitud < 0,2 % f.s. o mejor y tiempo de respuesta < 4 ms. Salida 4÷20mA, alimentación en bucle de corriente o 10÷28 Vdc, consumo < 0,3W.

Key points

  • Rangos 0÷5, 0÷10, 0÷15, 0÷20, 0÷30 y 0÷50 m H2O; cable compensado de la longitud del rango
  • Sensibilidad 0,001 bar; exactitud < 0,2 % f.s. o mejor; tiempo de respuesta < 4 ms
  • Transductor piezométrico; compensación automática de la presión atmosférica con cable especial
  • 4÷20mA output; with MCS module (optional) 0÷2Vdc (A) or RS485 / Modbus (C)
  • Power supply: current loop or 10–28 Vdc; consumption < 0.3W; protections against reverse polarity and transients
  • Condiciones de funcionamiento -10 ÷ +55 °C; acero inoxidable 316 y cable PUR; 100g; CE

Technical Frequently Asked Questions

¿Qué rangos y exactitud tiene?

Rangos 0÷5, 0÷10, 0÷15, 0÷20, 0÷30 y 0÷50 m H2O. Exactitud < 0,2 % f.s. o mejor, sensibilidad 0,001 bar y tiempo de respuesta < 4 ms.

What kind of outlet and power supply does it have?

Salida 4÷20mA (LPxx-B), con módulo MCS (opcional) 0÷2Vdc o RS485 / Modbus. Alimentación en bucle de corriente o 10÷28 Vdc, consumo < 0,3W.

¿De qué material es?

Cuerpo de acero inoxidable 316 y cable PUR, con protecciones contra inversión de polaridad y transitorios.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeNivel hidrométrico (piezómetro)
Transducer typePiezometric
Ranges0÷5, 0÷10, 0÷15, 0÷20, 0÷30 y 0÷50 m H2O
Sensitivity0.001 bar
Accuracy< 0,2 % f.s. o mejor
Response time< 4 ms
Regulatory complianceEC
Exit signals
Output signal (LPxx-B)4÷20mA
With MCS module (optional)0÷2Vdc (A) or RS485 / Modbus (C)
Power supply, environment, and mechanical data
FeedingCurrent loop or 10÷28 Vdc
Consumption< 0.3W
Operating conditions-10 ÷ +55 °C
ProtectionsAgainst polarity reversal and transients
Body and cableAcero inoxidable 316 y cable PUR
Weight100g
ReferenceConfiguration
LP05-BLP05BRange: 0–5 m H2O · Output: 4–20 mA · Supply: With 5 m compensated cable; calibration report
LP10-BLP10BRange: 0–10 m H2O · Output: 4–20 mA · Supply: With 10 m compensated cable; calibration report
LP15-BLP15BRange: 0–15 m H2O · Output: 4–20 mA · Supply: With 15 m compensated cable; calibration report
LP20-BLP20BRange: 0÷20 m H2O · Output: 4÷20mA · Supply: With 20 m compensated cable, calibration report
LP30-BLP30BRange: 0-30 m H2O · Output: 4-20 mA · Supply: With 30 m compensated cable, calibration report
LP50-BLP50BRange: 0–50 m H2O · Output: 4–20 mA · Supply: With 50 m compensated cable; calibration report
NESA LPxx Piezometric Level Sensor
Dimensiones del sensor de nivel piezométrico LPxx de NESA

Other products

Monitran-Logo
Triaxial (X, Y, Z axes) | 3 isolated AC outputs of 100 mV/g ±10% | 2 Hz to 9 kHz ±5% | ±80 g | -25 to 125 °C | 4-pin M12 connector | Aluminum, IP54
DPF Sensors logo
Radar level sensor, range up to 10 meters.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Cantilever metric wheel | Self-lubricating sintered pivot | 1 to 5000 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP66 shaft (IP67 sealed) | 60 kHz (100 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
CANopen (C2) or fiber optic (CF) | Square flange □63.5 mm | Shaft Ø10 h8 | 16 bit; 30 bit in 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
NESA Environmental Meters
Piezometric capsule, NTC | 0–20 bar | -5–+80 °C | <0.5% fs or better | 2 x 4–20 mA | Current loop or 10–28 Vdc | 316 stainless steel
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 50…900 mm | Resolution < 0.01mm | M6 stem | 42VDC | IP55 | 10m/s
ATESTEO LOGO, manufacturer of torque sensors
Rotary Telemetry | 1,000 Nm | 20,000 RPM | PCD Flange 101.5 mm | Inertia 0.0033 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7, tangential pin | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø80, servo type flange | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Shopping Basket