LIMIT-V Plus
Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable front interior power supply 24.. 230VAC-DC (±15%) isolated
- Manufacturer: DPF Sensors
- Category: Process isolators, Signal converters, INSTRUMENTATION, Others
Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable front interior power supply 24.. 230VAC-DC (±15%) isolated This equipment limits the analog input signal 0/10V, obtaining at the output the input limited to the maximum value, adjusted by the limiting potentiometer accessible from the front and protected by a folding cover
Properties
Other products
Universal 2-way galvanic converter/isolator. Input: 0…500 mV, 0…700 V, (solar spatial up to 1500 V) / 20 mA, PWM, adjustable output (max. 5 mA) 0/24 Vdc for 6/12/18 Vdc control... others, 24 VDC power supply (range 20.. 30 V)
Displacement sensor range from 10 to 100 mm, with and without spring feeler, IP67
Multiplexer for 4 or 8 3-wire Pt100 or Pt1000 probes at the output of the same probe
Industrial inclinometer. Range 10º to 360º, 1 and 2 axes, Output signal 0.5-4.5 Vdc / 4…20 mA, CAN / RS485/ TTL / 422, Power supply 9…36 Vdc, IP67, Working temperature -40…+85ºC, accuracy ±0.2º
INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.
TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g
Anemometer with pulse output, proportional to wind speed, industrial use
Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Wirelessly configurable RTD to 0/10V converter in chip format
Quadrupler – 0/10V signal isolator (with excitation), 4-way isolation, 4 0/10V outputs. Power supply: 24VDC (20.. 30V)