NR1

Budget-friendly price Request a quote
CONDUCTIVE ELECTRODES
Set of electrodes for level control in conductive liquids. Applicable in small, open or closed tanks.

Properties

  • Process connection: 1″ G threaded plug (PVC)
  • Electrical connection: PVC cable (1 meter)
  • Temperature: +70 ºC
  • Pressure: Atmospheric
  • Protection: IP66
  • Maximum 2 electrodes
  • Polyolefine PE coated electrodes option

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø59, hollow shaft Ø15 F7 | Elastic coupling | 360, 4096, 8192 or 65536 steps | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
63 mm square flange, Ø9.52 h7 shaft | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP65 shaft (IP66 sealed) | Optional shaft Ø6, 8, 10, 11 or 12
Disibeint Electronic, manufacturer of level sensors and control relays
MAGNETIC LEVEL SWITCHES · FIXED LENGTH
DPF Sensors logo
Field transmitters for measuring the concentration of various types of gases. With alarm, light signal, and use in ATEX zones. For indoor and outdoor use.
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
ST315, Measuring range 0 to 2,000 mS, extendable and submersible. Working range 0 to 40°C
NESA Environmental Meters
Support arm | 700/750 mm | Jaws Ø 40 mm | Post Ø max. 60 mm | Anodized aluminum | Stainless steel screws.
Monitran-Logo
Salida de carga 50 pC/g (100 mV/g tras amplificador) | 2 Hz a 10 kHz ±5 % | -55 a 250 °C | Sin electrónica en el cabezal | Cable de 5 m | Acero inoxidable, IP67
Dimetix_AG-1
For travel distances of a few meters and up to ~50 m, with typical accuracy of ±1 mm @2σ, 100 Hz and extended thermal range of -40 to +60 °C.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø15, 16 or 20 mm | Housing Ø59 mm | 1 to 3600 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP65 sealed) | Internal tangential coupling
Shopping Basket