Novotechnik MUP080 | 0-10V and 4-20mA Signal Converter
- Manufacturer: Novotechnik
- Category: Process isolators, Signal converters, Signal converters, INSTRUMENTATION, mV...1500 V / 4-20 mA, Resistance and Potentiometers
He MUP080 from Novotechnik It is a signal converter for linear and rotary potentiometric sensors that transforms the signal from a potentiometer into a standardized industrial output of 0…10 V either 4…20 mA. This conversion facilitates the integration of potentiometers into automation systems, PLCs, data acquisition, process control, and industrial instrumentation.
Its high-impedance input circuit captures the potentiometer's cursor signal with virtually no load, preserving the accuracy, linearity, and stability of the connected sensor. This feature allows for full utilization of the performance of precision potentiometric sensors in both linear displacement and angular position applications.
The MUP080 incorporates an internal reference to 10 VDC to power the connected potentiometer and has ample power supply 18…30 VDC. Its compact design for DIN rail mounting EN 50022 35 mm It facilitates installation in electrical panels, control cabinets, and decentralized industrial systems.
Thanks to its typical linearity of ±0.1 %, low thermal coefficient of 20…25 ppm/K and response time of 1 ms, The MUP080 signal converter provides stable, fast, and accurate conversion of the measurement signal. It is especially suitable for industrial applications where it is necessary to convert a potentiometric signal into a standard signal compatible with PLCs, process indicators, recorders, SCADA systems, and data acquisition equipment.
The MUP080 signal converter is an ideal solution for potentiometric linear sensors, potentiometric rotary sensors, positioning systems, test benches, industrial machinery, process control, industrial automation, and the integration of potentiometric signals in control and monitoring environments.
Properties
| Property | Worth |
|---|---|
| Manufacturer | Novotechnik |
| Model | MUP080 |
| Guy | Analog signal conditioner |
| Application | Linear and rotary potentiometric sensors |
| Entrance | Linear or rotary potentiometer |
| Potentiometer allowable resistance | 0.5…100 kΩ |
| Minimum resistance of the potentiometer | ≥ 500 Ω |
| Internal reference for potentiometer | 10 VDC |
| Feeding | 18…30 VDC |
| Maximum consumption | 30 mA |
| Exit available | 0…10 V or 4…20 mA |
| Typical linearity | ±0.1 % |
| Typical accuracy | ±1 % of the range |
| Gain tolerance | ±1 % |
| Offset tolerance | ±1 % |
| Typical thermal coefficient | 20…25 ppm/K |
| Response time | 1 ms |
| Maximum load output voltage | 1 kΩ |
| Maximum resistance output current | 500 Ω |
| Reverse polarity protection | Yes, on power lines |
| Stabilization time | 15 min |
| Mounting | DIN EN 50022 35mm rail |
| Dimensions | 90.5 × 79 × 25 mm |
| Housing material | PA66 UL94V-0 self-extinguishing |
| Electrical connection | Screw terminals up to 1.5 mm² |
| Degree of protection | IP20 |
| Working temperature | 0…60 °C |
| Storage temperature | -10…+85 °C |
| Electromagnetic compatibility | EN 61326-1 |
| Electrical safety | EN 61010-1 |
| Dielectric insulation | 1.5 kV for 1 minute |
Available versions
| Reference | Model | Exit |
|---|---|---|
| 054220 | MUP-080-111 | 0…10 V |
| 054221 | MUP-080-113 | 4…20 mA |
Other products
