Dimetix PROFINET Interface for D-Series
PROFINET Interface for D-Series
- Manufacturer: DIMETIX AG
- Category: Communication, Signal converters, Displacement, INSTRUMENTATION, Laser distance sensor, SENSORS, Level Sensors, Level sensors for solids
The Industrial Ethernet Swap Cover is an optional and powerful extension of the D-Series laser sensors with the most popular Industrial Ethernet protocols: PROFINET®, EtherNet/IP™ and EtherCAT®. The Industrial Ethernet Swap Cover can be mounted on almost all D-Series laser sensors.
Properties
• The most popular industrial Ethernet interfaces available: PROFINET®, EthernNet/IP™ and EtherCAT®
• Easy mounting of optional industrial Ethernet interfaces to a D-series laser sensor
• Compact interchangeable cover design with industrial Ethernet
• IP65 (protected against dust and water ingress) in conjunction with the D-series laser sensor
• Wide power supply range (12…30 VDC)
• Wide operating temperature range (depends on D-series device)
• High cyclic measurement data exchange via industrial Ethernet protocol (up to 500 Hz / ≥2 ms)
• Simple data structure for cyclic/acyclic data and network integration
• D-Series laser sensor configuration possibilities with cyclic and acyclic protocol communication
Other products
B&C Electronics
Conductivity ranges from 10mS to 2,000mS 4/20mA output
B&C Electronics
For ultrapure water Cell content K=0.01cm-1 (0.2 to 20µS) Thread 1″ BSP, PVC body material, PT-100 for temperature measurement
B&C Electronics
Conductivity range from 4 to 2,000 mS/cm and TDS (total dissolved solids) from 10ppt to 1,000ppt 4…20mA and Modbus output
B&C Electronics
Combined glass/gel reference pH electrode, 9.5mm diameter Epoxy body and 1.5m cable with BNC connector.
