CTC
Tension/compression load cell
- Manufacturer: DPF Sensors
- Category: Load Cells - Weight, SENSORS
Universal traction – compression, made of nickel-plated steel
Properties
KG:
- 250, 300, 500, 750, 1.000, 1.500, 2.000, 2.500, 3.000, 5.000, *10.000
Other products
Eje pasante Ø6, 8, 10, 12 o 15 mm | Carcasa Ø59 mm | 1 a 50000 imp/vuelta | NPN, PNP, push-pull, driver, 1 Vpp | Alimentación 5–30 V | IP64 eje (IP65 sellado) | Sin acoplamiento interno
Wall temperature sensor with Pt100 sensor, built-in Data Logger.
2-way universal galvanic isolator/converter. 4 channels, Input: 4/20 mA (Active/Passive), Output: 0-10 VDC, Power supply: 10-30 VDC
Power supply failure detection and monitoring of up to 21 signals.
Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)
Signal duplicator – isolator 0/±10V input: 0/±10V (24V/20mA) isolated output 2 x 0/±10V power supply 24VDC (20.. 30V) isolated
Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC
Spindle Ø14 h6, housing Ø170 mm | Centering Ø140 h6 | 18000–900000 impedances/revolution | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 spindle (IP65 output with cable) | ±2.5″; 2200 kHz with interpolation
Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in data logger, without probe.
Isolator-converter input: 0/1000VDC to Isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated.