B&C SZ151 pH Sensor
Combined glass/gel pH reference electrode, with 1.5m cable and BNC connector, double ceramic junction for high temperature
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, Ph and Redox probes
The B&C Electronics SZ151 pH sensor is a universal digital sensor for pH measurements where the temperature of the medium is high, compatible with all pH controllers on the market and for all types of stable processes. It provides reliable measurements even at the extremes of the pH range.
This pH electrode allows for precise measurement at an extraordinary cost. Its bulb is constructed of extra-hard glass, while the body is made of epoxy for added protection.
It contains a potassium chloride (KCl) solution inside, which extends its useful life and keeps it in good condition. The sensor does not require additional electrolyte.
Specially designed for use in hydroponic crops.
Properties
- Measuring range: 0 to 13 pH
- Temperature range: -5 to 130 °C
- Body material: Epoxy
- Size: 75X12
- Maximum pressure: up to 7 bars
- Connector: 1.5m cable with BNC connector
- Dimensions: 110 mm in length and 12 mm in diameter
- Application: Wastewater and primary water
- Zero Point: pH 7
- Accuracy: ± 0.03 pH unit
- Response time: < 10 seconds (95% response)
- pH electrode solution: pH buffer with added chloride
- Reference type: Annular ceramic, sealed
- External reference electrode solution: Polysaccharide gel, 4M KCI with AgCI
Other products
Accelerometer with 3 axes, the output signal can be in mA, Vcc and RS485 communication
I/55 – Standard Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 55×56 mm, Pulse range: 1 to 2,540
High Speed and Precision Telemetry (500 m / ±1 mm / -40…+60ºC / 250 Hz)
Anemometer with pulse output, proportional to wind speed, industrial use
pH probe for immersion in PVC tube. Length 1170 mm.
Wire displacement sensor, ranges from 100 mm to 1250 mm, with 5 Kohm resistance output signal, 0-5/10 Vdc, 4-20 mA, RS485 or pulse, optionally with IP67 environmental protection. Robust
Adjustable industrial thermostat.
Passive Inductive | Range 5 to 15 mm | M12x1 Threaded Housing | Infinite Resolution | IP67 | External Analog Output
Combined glass/reference pH electrode with Pt100. Double PTFE junction. PVDF body.
I/90 – Incremental Encoder Ø 90 mm, solid shaft Ø 10 mm or Ø 12 mm, robust metal body, resolution up to 25,000 dpi