AMPLI-V150
Voltage output converter with amplified current
- Manufacturer: DPF Sensors
- Category: Signal converters, INSTRUMENTATION, Signals with power
Voltage output converter with amplified current
Input: i, V, i, Pot
Output: 0/10V (max. 150mA) – 0/24V (max. 150mA)
Power supply: 24.. 230VAC-DC (±15%) isolated
Properties

Other products

OBD-II GPS tracker with 4G LTE Cat 1, OEM data reading and Plug & Play installation

4 channels of 3-way 0/10V isolator (with excitation), 24VDC (20.. 30V) isolated power supply

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20 mA active, Power supply: 24VDC (20.. 30V) isolated

Three-phase voltage monitoring relay. Overvoltage, undervoltage, and sequence

Accelerometer with 3 axes, the output signal can be in mA, Vcc and RS485 communication

4/20mA cable converter for 1 load cell, Built-in multiplexed 4/20mA output signal (allows individual control of each cell)

Incremental wire encoder for travels of 6, 8, 10 and 12 m, resolution of 0.1 to 1 mm/pulse and Push-Pull or Line Driver output.

Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection

Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in data logger, without probe.

2-channel encoder isolator-amplifier-duplicator-adapter. Up to 1 MHz (adapts simplex signals to differential signals).